Surface Film-Induced Stress Gradients and Core Loss in Non-Oriented Electrical Steel

Authors:

Abstract
Surface films formed during final annealing in non-oriented electrical steel (NOES) develop thermal stresses during cooling because of the mismatch in coefficients of thermal expansion between the film and steel substrate. These stresses induce elastic bending of the sheet, increasing core loss by 3–4%, a non-negligible rise in energy dissipation given the widespread use of NOES. Selective removal of the surface film reduces core loss and increases the curvature radius from 0.19 to 0.20 m, indicating the relaxation of film-induced bending. Mechanical analysis reveals that the surface film generates a through-thickness stress gradient in the steel substrate, producing a maximum surface stress of approximately 9.8 MPa. Micromagnetic simulations incorporating the measured bending state demonstrate that the resulting stress gradient stabilizes a higher density of 90° domain walls during magnetization reversal. Unlike the stress-free condition, these domains persist to higher magnetic fields, leading to enhanced domain interactions and reduced magnetization efficiency. These findings demonstrate that surface film-induced bending stress alters domain structure evolution and contributes to increased core loss by promoting the formation and retention of 90° domain walls. The results highlight a previously overlooked coupling between surface film mechanics and magnetic loss behavior in NOES.