Thermal management of Li-ion batteries in electric vehicles by nanofluid-filled loop heat pipes
Authors:
Open Access
- 1 April 2024
- journal article
- research article
- Published by EDP Sciences in Science and Technology for Energy Transition
- Vol. 79, 23
Abstract
An analytical model is developed to determine the thermal performance of a Loop Heat Pipe filled (LHP) with copper oxide–water and alumina–water nanofluids for battery thermal management in electric vehicles. The thermal performances of the LHP are predicted for different heat loads and nanoparticle concentrations. It is demonstrated that for fast charging operation corresponding to a heat load of 150 W, the LHP ensures evaporator temperatures of less than 60 °C for a heat sink temperature of 40 °C. The heat transport capacity of the LHP is enhanced and the evaporator temperature is deceased by augmenting the nanoparticle concentration. The water–CuO nanofluid-filled LHP performs better than the water–Al2O3 nanofluid-filled one. The addition of the nanoparticles increases the LHP total pressure drop and the driving capillary pressure. The capillary limit of the water–CuO nanofluid-filled LHP is hardly affected by CuO nanoparticle concentration until 6% beyond which the capillary limit starts decreasing. For the water–Al2O3 nanofluid-filled LHP, the capillary limit decreases when Al2O3 nanoparticle concentration increases. Beyond 6% Al2O3 nanoparticle concentration, the capillary limit of the Al2O3-filled LHP becomes lower than the water-filled one.Keywords
Funding Information
- Ministère de l'Enseignement Supérieur et de la Recherche Scientifique
This publication has 43 references indexed in Scilit:
- Experimental study on U-shape flat thermosyphon for thermal management of power batteryJournal of Mechanical Science and Technology, 2021
- Effect of copper–graphene hybrid nanoplatelets in a miniature loop heat pipeJournal of Thermal Analysis and Calorimetry, 2021
- Experimental investigation and optimization of loop heat pipe performance with nanofluidsJournal of Thermal Analysis and Calorimetry, 2021
- Experimental investigation on thermal management of cylindrical Li-ion battery pack based on vapor chamber combined with fin structureApplied Thermal Engineering, 2019
- Feasibility study on a novel 3D vapor chamber used for Li-ion battery thermal management system of electric vehicleApplied Thermal Engineering, 2019
- Heat transfer performance of a compact loop heat pipe with alumina and silver nanofluidJournal of Thermal Analysis and Calorimetry, 2018
- Lumped parameter network simulation of a Loop Heat Pipe for energy management systems in full electric vehiclesApplied Thermal Engineering, 2018
- Experimental investigation on performance of lithium-ion battery thermal management system using flat plate loop heat pipe for electric vehicle applicationApplied Thermal Engineering, 2016
- Thermal performance of a miniature loop heat pipe using water–copper nanofluidApplied Thermal Engineering, 2015
- Eine neue Bestimmung der MoleküldimensionenAnnalen der Physik, 1906