Newton's cradle motion-like triboelectric nanogenerator to enhance energy recycle efficiency by utilizing elastic deformation
- 8 September 2015
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 3 (42) , 21133-21139
Abstract
Triboelectric nanogenerators (TENG) that harvest energy from ambient environment have attracted great attention since they were first reported. However, the structures of TENGs working in the vertical contact-separation mode are considerably monotonous and energy loss cannot be avoided during the working process. In this study, we design a novel TENG, which is based on three elastic plates and one acryl board in the center with two identical steel plates on both sides, using which periodic contact/separation of the friction layers proceeds like Newton's cradle, except for the intermittent input of mechanical energy to overcome the electrostatic interaction on the charged friction layers. Such a lamination structure in the original contact mode can provide considerably higher energy conversion efficiency than that of the friction layers in the original separation mode. With this new design, the output current of the TENG is 5.7 times as much as that of a common contact/separation TENG and 2.3 times as much as that of a similar structure TENG without the use of elasticity. The maximum short-circuit current, open-circuit voltage and output power are 114 μA, 428 V, and 4.32 W m−2, respectively, which are strong enough to light more than one hundred commercial LED lights. In addition, the TENG was applied to a self-powered flashing clapping palm decorated by 29 LEDs, which might replace the fluorescence palms that are powered by the chemical reactions of a dye mixed solution, in the future.Keywords
This publication has 36 references indexed in Scilit:
- Highly conductive PEDOT electrodes for harvesting dynamic energy through piezoelectric conversionJournal of Materials Chemistry A, 2014
- High-performance flat-panel solar thermoelectric generators with high thermal concentrationNature Materials, 2011
- Fabrication of a Highly Sensitive Hydrazine Electrochemical Sensor Based on Bimetallic Au-Pt Hybrid Nanocomposite onto Modified ElectrodeNano-Micro Letters, 2010
- Novel micro-ring structured ZnO photoelectrode for dye-sensitized solar cellNano-Micro Letters, 2010
- Cooling, Heating, Generating Power, and Recovering Waste Heat with Thermoelectric SystemsScience, 2008
- A micro electromagnetic generator for vibration energy harvestingJournal of Micromechanics and Microengineering, 2007
- Piezoelectric Nanogenerators Based on Zinc Oxide Nanowire ArraysScience, 2006
- A thermally self-sustained micro solid-oxide fuel-cell stack with high power densityNature, 2005
- Design and fabrication of a new vibration-based electromechanical power generatorSensors and Actuators A: Physical, 2001
- Energy conservation in the picosecond and subpicosecond photoelectric effectPhysical Review Letters, 1988