Numerical Modeling of Scour in Cohesive Soils Around Artificial Rock Island of Cooper River Bridge
Authors:
- 1 January 2003
- journal article
- research article
- Published by SAGE Publications in Transportation Research Record: Journal of the Transportation Research Board
- Vol. 1851 (1) , 45-50
Abstract
A new laboratory-based methodology for prediction of the maximum scour depth in cohesive soil has recently been developed at the University of South Carolina. Because of the absence of field data, a computational fluid dynamics model, FLUENT, is used to test the scale effects associated with such a methodology. The numerical model was first verified against measurements obtained in the laboratory. The numerical results agreed satisfactorily with the measurements. Then, the numerical model was applied to the rock island protecting the main piers of the Cooper River Bridge, located in Charleston, South Carolina. The scour hole created around the island in the laboratory was scaled up and used in the numerical model. The computed bed shear stresses compared satisfactorily with those scaled up from the measurements and the shear stress at which the field sample begins to erode. It was found that the scour depth of 3.7 m represents the equilibrium state, which is similar to the results scaled up from the laboratory experiments. The numerical results showed that the scour depth of 36 m calculated by the HEC-18 approach is significantly overestimated.Keywords
This publication has 6 references indexed in Scilit:
- Simulation of flow around piersJournal of Hydraulic Research, 2002
- Flume Tests for Scour in Clay at Circular PiersJournal of Hydraulic Engineering, 2001
- SRICOS: Prediction of Scour Rate in Cohesive Soils at Bridge PiersJournal of Geotechnical and Geoenvironmental Engineering, 1999
- Scale Effect in Pier-Scour ExperimentsJournal of Hydraulic Engineering, 1998
- Flow around Bridge PiersJournal of Hydraulic Engineering, 1998
- Clear‐Water Scour at Cylindrical PiersJournal of Hydraulic Engineering, 1983