6.8 A 36Gb/s Adaptive Baud-Rate CDR with CTLE and 1-Tap DFE in 28nm CMOS
- 1 February 2019
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 126-128
Abstract
Baud-rate clock-and-data recovery circuits (CDR) are ubiquitous in recent receiver designs as a means of lowering power consumption by sampling the data only once per UI. To further reduce power, prior works in pattern-based baud-rate PD [1] and FD [2] combine clock & data recovery by sharing comparators between the DFE and the PD. However, both CDRs [1, 2] were manually tuned by sweeping the equalization settings of the CTLE and the comparator levels in order to achieve lock. Since the two settings are correlated, it is time-consuming and tedious to sweep the entire solution space. In this paper, we propose an adaptive engine where the CDR system searches and converges to an optimal lock and sampling point. The proposed scheme, implemented in 28nm CMOS and operating at 36Gb/s, relies on the data eye to autonomously adapt the parameters of a CTLE, a 1-tap DFE, and the PD locking point.Keywords
This publication has 5 references indexed in Scilit:
- 6.6 A 22.5-to-32Gb/s 3.2pJ/b referenceless baud-rate digital CDR with DFE and CTLE in 28nm CMOS2017
- 3.5 A 56Gb/s NRZ-electrical 247mW/lane serial-link transceiver in 28nm CMOS2016
- 10.5 A 5.9pJ/b 10Gb/s serial link with unequalized MM-CDR in 14nm tri-gate CMOS2015
- A 16 Gb/s 3.7 mW/Gb/s 8-Tap DFE Receiver and Baud-Rate CDR With 31 kppm Tracking BandwidthIEEE Journal of Solid-State Circuits, 2014
- Adaptive equalization and data recovery in a dual-mode (PAM2/4) serial link transceiver2004