Stress-Intensity Factors for Corner Cracks in Rectangular Bars
Authors:
- 1 January 1988
- book chapter
- Published by ASTM International
- p. 43-55
Abstract
This paper presents stress-intensity factors for a wide range of quarter-elliptical corner cracks in rectangular bars. Cracked configurations were subjected to remote tension, in-plane bending, or out-of-plane bending. The ratio of crack depth to crack length ranged from 0.2 to 2; the ratio of crack depth to specimen thickness ranged from 0.2 to 0.8; and the ratio of crack length to specimen width ranged from 0.04 to 0.8. The configurations analyzed varied from a square bar to a very wide plate. These particular crack configurations were chosen to cover the range of shapes and sizes that have been observed to grow in experiments conducted on rectangular bars. The stress-intensity factors were calculated by a three-dimensional finite-element method. Finite-element models employed singularity elements along the crack front and linear-strain elements elsewhere. The models had about 7000 degrees of freedom. Stress-intensity factors were calculated using a nodal-force method. The present results were compared with other numerical results for a quarter-circular corner crack configuration. The present results along the interior of the crack generally agreed within 3% with those from the literature. Some larger differences (3 to 13%) were observed near the intersection of the crack front and the free surfaces (in the boundary-layer region). Thus, analyses were also performed to study the effect of mesh refinement in the boundary-layer region and the influence of Poisson's ratio on the distribution of stress-intensity factors.Keywords
This publication has 10 references indexed in Scilit:
- On the Three-Dimensional Implications of LEFM: Finite Element Analysis of Straight and Curved Through-Cracks in a Plate1985
- PREDICTION OF FATIGUE CRACK-GROWTH PATTERNS AND LIVES IN THREE-DIMENSIONAL CRACKED BODIES1984
- Stress-Intensity Factor Equations for Cracks in Three-Dimensional Finite Bodies1983
- The quarter-infinite crack in a half space; Alternative and additional solutionsInternational Journal of Solids and Structures, 1980
- Stress-intensity factors for a wide range of semi-elliptical surface cracks in finite-thickness platesEngineering Fracture Mechanics, 1979
- GENERAL NUMERICAL METHOD FOR THREE-DIMENSIONAL SINGULARITIES IN CRACKED OR NOTCHED ELASTIC SOLIDS1978
- State of stress at the vertex of a quarter-infinite crack in a half-spaceInternational Journal of Solids and Structures, 1977
- Stress Intensity Factor of a Corner Crack1976
- 3-D elastic singularity element for evaluation of K along an arbitrary crack frontInternational Journal of Fracture, 1973
- An approximate three-dimensional theory of plates with application to crack problemsInternational Journal of Engineering Science, 1970