Reverberation chambers for testing wireless devices and systems
Authors:
- 3 July 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electromagnetic Compatibility Magazine
- Vol. 9 (2) , 45-55
Abstract
Testing of wireless devices and systems is becoming increasingly important in the technological development of Long Term Evolution (LTE) and 5G mobile networks. Both mobile and base station manufacturers are interested in assessing system performance and user perceived quality in realistic propagation environments, including indoor and outdoor conditions. Real-life electromagnetic environments exhibit rich multipath propagation and a strong attenuation of the wireless signal over the propagation channel. Emulating those conditions in anechoic chambers requires the careful arrangement of many interference sources in multiple configurations, which leads to complex and time-consuming measurements. The reverberation chamber (RC) is a metallic cavity where the signal created by a single source is reflected and diffused to create multipath fading. This paper gives an overview of how an RC can be tuned to emulate channel parameters, e.g., power delay profile, time delay spread, coherence bandwidth and Rician K-factor, of real-life environments The addition of absorbing material inside the RC allows for varying those parameters, thus recreating line of sight and imperfect propagation conditions experienced by the user equipment (UE). Compliant electromagnetic compatibility downlink and uplink tests are shown for selected MIMO configurations as well as for Internet of Things devices. The tests are carried out using a commercial base station connected to the live national mobile network of a mobile operator. Evaluated network parameters are throughput, signal to noise ratio, modulation schemes and other settings of both the base station and of the UE to assess the quality of the digital communication.Keywords
This publication has 42 references indexed in Scilit:
- Probability Distribution of the Coherence Bandwidth of a Reverberation ChamberIEEE Transactions on Antennas and Propagation, 2015
- Characteristics of wireless systems in resonant environmentsIEEE Electromagnetic Compatibility Magazine, 2014
- Parameter Estimation and Uncertainty Evaluation in a Low Rician K-Factor Reverberation-Chamber EnvironmentIEEE Transactions on Electromagnetic Compatibility, 2014
- ABSORBING CROSS SECTION IN REVERBERATION CHAMBER: EXPERIMENTAL AND NUMERICAL RESULTSProgress In Electromagnetics Research B, 2012
- MODELING OF THE HUMAN EXPOSURE INSIDE A RANDOM PLANE WAVE FIELDProgress In Electromagnetics Research B, 2011
- Numerical Simulation of LOS and NLOS Conditions for an Antenna Inside a Reverberation ChamberJournal of Electromagnetic Waves and Applications, 2010
- Quantifying the Double Slope Effect in Coupled Volume Room SystemsBuilding Acoustics, 2009
- Requirements for an Effective Reverberation Chamber: Unloaded or LoadedIEEE Transactions on Electromagnetic Compatibility, 2006
- Radiation efficiency, correlation, diversity gain and capacity of a six-monopole antenna array for a MIMO system: theory, simulation and measurement in reverberation chamberIEE Proceedings - Microwaves, Antennas and Propagation, 2005
- Reverberating chambers as sources of stochastic electromagnetic fieldsIEEE Transactions on Electromagnetic Compatibility, 1996