Characterization of SAC – x NiO nano-reinforced lead-free solder joint in an ultra-fine package assembly
- 1 April 2019
- journal article
- research article
- Published by Emerald Publishing in Soldering & Surface Mount Technology
- Vol. 31 (2) , 109-124
Abstract
Purpose: This study aims to investigate the NiO nano-reinforced solder joint characteristics of ultra-fine electronic package. Design/methodology/approach: Lead-free Sn-Ag-Cu (SAC) solder paste was mixed with various percentages of NiO nanoparticles to prepare the new form of nano-reinforced solder paste. The solder paste was applied to assemble the ultra-fine capacitor using the reflow soldering process. A focussed ion beam, high resolution transmission electron microscopy system equipped with energy dispersive X-ray spectroscopy (EDS) was used in this study. In addition, X-ray inspection system, field emission scanning electron microscopy coupled with EDS, X-ray photoelectron spectroscopy (XPS) and nanoindenter were used to analyse the solder void, microstructure, hardness and fillet height of the solder joint. Findings: The experimental results revealed that the highest fillet height was obtained with the content of 0.01 Wt.% of nano-reinforced NiO, which fulfilled the reliability requirements of the international IPC standard. However, the presence of the NiO in the lead-free solder paste only slightly influenced the changes of the intermetallic layer with the increment of weighted percentage. Moreover, the simulation method was applied to observe the distribution of NiO nanoparticles in the solder joint. Originality/value: The findings are expected to provide a profound understanding of nano-reinforced solder joint’s characteristics of the ultra-fine package.Keywords
This publication has 31 references indexed in Scilit:
- Influence of Ni nanoparticle on the morphology and growth of interfacial intermetallic compounds between Sn–3.8Ag–0.7Cu lead-free solder and copper substrateIntermetallics, 2013
- Effect of addition of TiO2 nanoparticles on the microstructure, microhardness and interfacial reactions of Sn3.5AgXCu solderMaterials & Design (1980-2015), 2011
- Effect of additions of ZrO2 nano-particles on the microstructure and shear strength of Sn–Ag–Cu solder on Au/Ni metallized Cu padsMicroelectronics Reliability, 2011
- Microstructure, kinetic analysis and hardness of Sn–Ag–Cu–1wt% nano-ZrO2 composite solder on OSP-Cu padsJournal of Alloys and Compounds, 2011
- Influence of SrTiO3 nano-particles on the microstructure and shear strength of Sn–Ag–Cu solder on Au/Ni metallized Cu padsJournal of Alloys and Compounds, 2011
- Effect of alloying elements on properties and microstructures of SnAgCu soldersMicroelectronic Engineering, 2010
- Elastic properties and thermal behavior of Sn–Zn based lead-free solder alloysJournal of Alloys and Compounds, 2010
- A Reliability Study of Nanoparticles Reinforced Composite Lead-Free SolderMATERIALS TRANSACTIONS, 2010
- Effect of nano Ni additions on the structure and properties of Sn–9Zn and Sn–Zn–3Bi solders in Au/Ni/Cu ball grid array packagesMaterials Science and Engineering: B, 2009
- Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodologyJournal of Materials Research, 2004