Ultrathin Conductive CeO2Coating for Significant Improvement in Electrochemical Performance of LiMn1.5Ni0.5O4Cathode Materials
Open Access
- 13 December 2016
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 164 (1) , A6236-A6243
Abstract
LiMn1.5Ni0.5O4 (LMNO) has a huge potential for use as a cathode material in electric vehicular applications. However, it could face discharge capacity degradation with cycling at elevated temperatures due to attacks by hydrofluoric acid (HF) from the electrolyte, which could cause cationic dissolution. To overcome this barrier, we coated 3–5 micron sized LMNO particles with a ∼3 nm optimally thick and conductive CeO2 film prepared by atomic layer deposition (ALD). This provided optimal thickness for mass transfer resistance, species protection, and mitigation of cationic dissolution at elevated temperatures. After 1,000 cycles of charge-discharge between 3.5 V–5 V (vs. Li+/Li) at 55°C, the optimally coated sample, 50Ce (50 cycles of CeO2 ALD coated) had a capacity retention of ∼97.4%, when tested at a 1C rate, and a capacity retention of ∼83% at a 2C rate. This was compared to uncoated LMNO particles that had a capacity retention of only ∼82.7% at a 1C rate, and a capacity retention of ∼40.8% at a 2C rate.Keywords
Funding Information
- National Science Foundation (NSF) (1464111)
- Energy Research and Development Center at Missouri University of Science and Technology
This publication has 34 references indexed in Scilit:
- Ultrathin Lithium-Ion Conducting Coatings for Increased Interfacial Stability in High Voltage Lithium-Ion BatteriesChemistry of Materials, 2014
- Understanding Transition-Metal Dissolution Behavior in LiNi0.5Mn1.5O4 High-Voltage Spinel for Lithium Ion BatteriesThe Journal of Physical Chemistry C, 2013
- Multilayer electrolyte cell: A new tool for identifying electrochemical performances of high voltage cathode materialsElectrochemistry Communications, 2013
- Graphene-oxide-coated LiNi0.5Mn1.5O4 as high voltage cathode for lithium ion batteries with high energy density and long cycle lifeJournal of Materials Chemistry A, 2013
- AlF3 coating of LiNi0.5Mn1.5O4 for high-performance Li-ion batteriesIonics, 2011
- Challenges for Rechargeable Li BatteriesChemistry of Materials, 2009
- Influence of carbon coating on the performance of a LiMn0.5Ni0.5O2 cathodeSolid State Sciences, 2002
- Electrochemical performance of nano-sized ZnO-coated LiNi0.5Mn1.5O4 spinel as 5 V materials at elevated temperaturesElectrochemistry Communications, 2002
- Solid-state redox potentials for Li[Me1/2Mn3/2]O4 (Me: 3d-transition metal) having spinel-framework structures: a series of 5 volt materials for advanced lithium-ion batteriesJournal of Power Sources, 1999
- A New Three‐Volt Spinel Li1 + x Mn1.5Ni0.5 O 4 for Secondary Lithium BatteriesJournal of the Electrochemical Society, 1996