Artificial arenite from wastes of natural sandstone industry
Open Access
- 30 March 2019
- journal article
- research article
- Published by Editorial CSIC in Materiales de Construcción
- Vol. 69 (333) , e178
Abstract
An artificial arenite was developed from the waste of the sandstone industry. The waste sandstone was treated to obtain different grain sizes that were recombined to reproduce the natural texture. An unsaturated polyester resin was added to the mixture of grains and the cement polymerization was initiated with methyl ethyl ketone peroxide. The product was compacted under pressure of 1.5 to 9.7 MPa and cured at 70 °C. The result was a new material with the appearance of the natural rock. Artificial sandstones were studied by SEM microanalysis, petrography study and XRF analysis. Measurements of flexural strength (9.9 MPa), apparent density (2110 kg/cm3), open porosity (7.6%), water absorption (1.2%), abrasion resistance (19 mm) and photostability (AE * = - 0.009) were carried out. The influence of the design of the mixture and its composition (fraction of aggregates, resin content and pressure) on the texture and the mechanical properties was studied.Keywords
This publication has 10 references indexed in Scilit:
- The effect of elevated temperature curing treatment on the compression strength of composites with polyester resin matrix and quartz fillerMaterials & Design (1980-2015), 2012
- Artificial aggregate made from waste stone sludge and waste siltJournal of Environmental Management, 2010
- Bearing behavior and failure mechanism of a shallow foundation located on/behind the crest of a poorly cemented artificial sandstoneInternational Journal of Rock Mechanics and Mining Sciences, 2008
- Artificial stone slab production using waste glass, stone fragments and vacuum vibratory compactionCement and Concrete Composites, 2008
- Provenance of fluvial sandstones at the start of late Jurassic–Early Cretaceous rifting in the Cameros Basin (N. Spain)Sedimentary Geology, 2007
- Sandstone Petrography of Continental Depositional Sequences of an Intraplate Rift Basin: Western Cameros Basin (North Spain)Journal of Sedimentary Research, 2003
- Clay mineral variations associated with diagenesis and low-grade metamorphism of Early Cretaceous sediments in the Cameros Basin, SpainClay Minerals, 1995
- The preparation (by an epoxy-resin method) and physical properties of artificial sandstonesSedimentary Geology, 1988
- Sand and Sandstone1987
- Plate Tectonics and Geochemical Composition of SandstonesThe Journal of Geology, 1983