A New Nonlinear Spatial Compliance Model Method for Flexure Leaf Springs with Large Width-to-Length Ratio under Large Deformation
Open Access
- 9 July 2022
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 13 (7) , 1090
Abstract
Flexure leaf spring (FLS) with large deformation is the basic unit of compliant mechanisms with large stroke. The stiffness along the non-working directions of FLSs with large width-to-length ratio (w/L) is high. The motion stability of the compliant mechanism based on this type of FLS is high. When this type of FLS is loaded along the width direction, the shear deformation needs to be characterized. Nevertheless, currently available compliance modeling methods for FLS are established based on Euler–Bernoulli beam model and cannot be used to characterize shear models. Therefore, these methods are not applicable in this case. In this paper, a new six-DOF compliance model for FLSs with large w/L is established under large deformation. The shear deformation along the width direction model is characterized based on the Timoshenko beam theory. The new constraint model and differential equations are established to obtain a high-precision compliance model expression for this type of FLS. The effects of structural parameters on the compliance of the FLS are analyzed. Finally, the accuracy of the model is verified both experimentally and by finite element simulation. The relative error between theoretical result and experiment result is less than 5%.Keywords
Funding Information
- National Natural Science Foundation of China (52175499)
This publication has 34 references indexed in Scilit:
- Large deflection stiffness analysis of parallel prismatic leaf-spring flexuresPrecision Engineering, 2013
- Fully-compliant statically-balanced mechanisms without prestressing assembly: concepts and case studiesMechanical Sciences, 2011
- A continuum-mechanics interpretation of Reissner's non-linear shear-deformable beam theoryMathematical and Computer Modelling of Dynamical Systems, 2011
- FlexDex™: A Minimally Invasive Surgical Tool With Enhanced Dexterity and Intuitive ControlJournal of Medical Devices, 2010
- Two general solutions of torsional compliance for variable rectangular cross-section hinges in compliant mechanismsPrecision Engineering, 2009
- Applications of dip-pen nanolithographyNature Nanotechnology, 2007
- A low-cost rate-grade nickel microgyroscopeSensors and Actuators A: Physical, 2006
- Characteristics of Beam-Based Flexure ModulesJournal of Mechanical Design, 2006
- Modeling the thermal behavior of a surface-micromachined linear-displacement thermomechanical microactuatorSensors and Actuators A: Physical, 2002
- A Simple and Accurate Method for Determining Large Deflections in Compliant Mechanisms Subjected to End Forces and MomentsJournal of Mechanical Design, 1998