Coordinated control of active tire lateral forces and roll centre height via active camber
- 17 February 2026
- journal article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering
Abstract
Active camber suspensions (ACS) can adjust wheel cambers by actively altering suspension geometry, showing great potential for improving vehicle dynamics. The active adjustment of suspension geometry will lead to much larger variations of vehicle roll centre height (RCH), which should be considered for vehicle dynamics. In this paper, the coordinated control methodology of active tire forces and roll centre height (CCM–ATF–RCH) via active camber of rear multi-link suspension is proposed to improve vehicle lateral dynamics. To explicitly exploit the coupling between camber and roll centre height, the kinematic characteristics of the multi-link active camber suspension (MACS) are embedded in both an eight-degrees-of-freedom (8-DOF) plant model and a 3-DOF control-oriented reference model. On this basis, the MPC-based coordinated controller is developed that dynamically updates vehicle parameters, including RCH, and allocates rear wheel camber to balance lateral force generation and roll stability under actuator and camber constraints. Simulation results demonstrate that the proposed CCM–ATF–RCH can adjust tire lateral forces and increase vehicle roll centre height simultaneously via cambering the wheel. Under a 60° step steer at 90 km/h ( μ = 0.85), the proposed CCM–ATF–RCH reduces the peak roll angle, yaw rate, and sideslip angle by 7.91%, 4.31%, and 12.37% compared with RCH-fixed active camber control. In a 108 km/h double lane change, it lowers the peak roll angle by about 7.6% while keeping similar yaw rate and side slip responses and the rear tires further from their friction limits, highlighting improved roll stability without loss of handling performance.Keywords
This publication has 18 references indexed in Scilit:
- Modeling and attitude control strategy for a parameter-uncertain wheel-legged vehicle with a new reconfigurable suspensionJournal of the Franklin Institute, 2025
- Control of Variable-Geometry Vehicle Suspensions2023
- Feasibility and performance analyses for an active geometry control suspension system for over-actuated vehiclesJournal of the Brazilian Society of Mechanical Sciences and Engineering, 2022
- Active camber and toe control strategy for the double wishbone suspension systemJournal of King Saud University – Engineering Sciences, 2019
- Contour line of load transfer ratio for vehicle rollover predictionVehicle System Dynamics, 2017
- Nonlinear analysis and control of a variable-geometry suspension systemControl Engineering Practice, 2017
- Road and off-road vehicle system dynamics. Understanding the future from the pastVehicle System Dynamics, 2015
- An overview on vehicle dynamicsInternational Journal of Dynamics and Control, 2013
- Editors’ perspectives: road vehicle suspension design, dynamics, and controlVehicle System Dynamics, 2011
- Improvement of vehicle roll stability by varying suspension propertiesVehicle System Dynamics, 2011