Determination of Optimal Roof Insulation Thickness in Residential Building in Marrakech
Authors:
- 1 December 2017
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
Most roofing systems on residential buildings in Morocco were installed when low initial cost was the primary factor in the choice of insulation quantity. Often, no insulation was applied in roofing systems. However, the new thermal comfort standards in residential buildings and the increased costs of energy required for heating and cooling has increased significantly the need of insulation materials. Thereby, this paper investigated the optimum insulation thickness determination for conventional roof in Marrakech. Extruded polystyrene expanded polystyrene and polyurethane were considered as insulation materials.Keywords
This publication has 8 references indexed in Scilit:
- Impact of external longwave radiation on optimum insulation thickness in Tunisian building roofs based on a dynamic analytical modelApplied Energy, 2016
- Study of the economical and optimum thermal insulation thickness for buildings in a wet and hot tropical climate: Case of CameroonRenewable and Sustainable Energy Reviews, 2015
- Study of the influence of roof insulation involving local materials on cooling loads of houses built of clay and strawEnergy and Buildings, 2012
- A study on the optimum insulation thicknesses of various types of external walls with respect to different materials, fuels and climate zones in TurkeyApplied Energy, 2012
- Effect of thermal mass on performance of insulated building walls and the concept of energy savings potentialApplied Energy, 2012
- Optimum insulation thickness of residential roof with respect to solar-air degree-hours in hot summer and cold winter zone of chinaEnergy and Buildings, 2011
- The effects of roof covering on the thermal performance of highly insulated roofs in Mediterranean climatesEnergy and Buildings, 2010
- The Effectiveness of Thermal Insulation in Different Types of Buildings in Hot ClimatesJournal of Thermal Envelope and Building Science, 2004