Monopolar Electro-Coagulation Process for Azo Dye C. I. Acid Red 18 Removal from Aqueous Solutions
Authors:
- Ali Reza RahmaniARAli Reza Rahmani
- Mohammad BazdarMBMohammad Bazdar
Open Access
- 24 December 2014
- journal article
- Published by Maad Rayan Publishing Company in Avicenna Journal of Environmental Health Engineering
- Vol. 1 (1)
Abstract
The discharge of wastewaters containing an untreated dye results in aesthetic problems and an increase in gases solubility, which causes light transmission inhibition into water bodies. In spite of advantages of physicochemical and biological methods, these processes produce huge amounts of sludge, toxic by-products and require several oxidant chemicals. By contrast, electrochemical processes because of their high versatility, high efficiency and eco-friendly properties are more acceptable. In the present study, the removal of azo dye Acid Red 18 and chemical oxygen demand (COD) from synthetic wastewater by monopolar (EC) process was investigated and key parameters such as operating time, current density (CD), initial pH and energy, and electrode consumption were optimized. It was found that the process had a very good efficiency in the removal of both COD and color; for the iron electrode, the maximum amounts of color and COD removal were 99.5% and 59.0%, respectively. An operating time of 45 min, pH of 7 and CD of 1.2 mA/cm2 was selected as the optimized condition. The optimization of variables is extremely crucial as it results in a decrease in costs, energy and electrode consumption. Overall, the iron electrode used less energy than the aluminum electrode and was more acceptable for use in this process due to economical reasons. The findings of UV/vis spectra illustrated that the structures of this dye were removed by the process. In comparison with traditional methods such as aerobic and anaerobic systems, the EC process is a suitable alternative for the treatment of wastewaters containing dye pollutants. Keywords: Acid Red 18; Solutions; Wastewater; Electro-CoagulationKeywords
This publication has 17 references indexed in Scilit:
- Degradation of azo dye C.I. Acid Red 18 in aqueous solution by ozone-electrolysis processJournal of Industrial and Engineering Chemistry, 2014
- Electrocoagulation for the treatment of textile industry effluent – A reviewJournal of Environmental Management, 2013
- Continuous thickening of activated sludge by electro-flotationSeparation and Purification Technology, 2013
- Optimization of electrocoagulation process for removal of an azo dye using response surface methodology and investigation on the occurrence of destructive side reactionsChemical Engineering and Processing - Process Intensification, 2013
- Post-treatment of anaerobically degraded azo dye Acid Red 18 using aerobic moving bed biofilm process: Enhanced removal of aromatic aminesJournal of Hazardous Materials, 2011
- Comparison of electrocoagulation using iron and aluminium electrodes with chemical coagulation for the removal of a highly soluble acid dyeDesalination, 2011
- Adsorption of Acid Red 18 (AR18) by Activated Carbon from Poplar Wood‐ A Kinetic and Equilibrium StudyJournal of Chemistry, 2009
- The decolorization of C.I. Reactive Black 5 in aqueous solution by electrocoagulation using sacrificial iron electrodesJournal of Hazardous Materials, 2009
- Photocatalytic degradation of azo-dye Acid Red 18Desalination, 2005
- Electrocoagulation (EC) — science and applicationsJournal of Hazardous Materials, 2001