Kinetostatics for variable cross-section continuum manipulators
Authors:
- 30 May 2021
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 11878-11883
Abstract
Continuum manipulators have shown a wide range of applications due to their inherent compliance and dexterity. At present, the cross-sectional dimension of these manipulators is often kept constant, which facilitates the design, fabrication and modeling processes. The famous piecewise-constant-curvature (PCC) assumption is widely used in the kinematics and motion control. By contrast, most natural creatures that have continuum structures usually exhibit variable cross sections, such as the elephant trunk and the octopus tentacle. Inspired by these creatures, variable cross-section continuum manipulators have been proposed in literature. For variable cross-section, the PCC assumption is no longer valid. In fact, the manipulator’s kinematics and statics are coupled, which should be considered and solved together. This paper establishes the general kinetostatic model of variable cross-section continuum manipulators, and performs experimental validations under various actuating and loading situations. Results showed that the proposed model has satisfactory accuracy in predicting the manipulator profile under various actuating and loading situations. The average root-mean-square error of the proposed model was 1.67 mm, and even the maximum error did not exceed 2.6 mm, according to all the 51 groups of tests on three 100 mm long prototypes. Furthermore, results also indicated that Type-1 manipulator (only varying the spacer dimension) has larger deflections and tends to be "softer" than Type-2 manipulator (only varying the backbone cross-sectional area). Results of this paper could be helpful for the design and analysis of variable cross-section continuum manipulators.Keywords
Funding Information
- National Natural Science Foundation of China
This publication has 30 references indexed in Scilit:
- A bioinspired soft manipulator for minimally invasive surgeryBioinspiration & Biomimetics, 2015
- Dynamic Model of a Multibending Soft Robot Arm Driven by CablesIEEE Transactions on Robotics, 2014
- Continuous Backbone “Continuum” Robot ManipulatorsISRN Robotics, 2013
- Jacobian Matrix of a Novel Continuum Robot for Search and RescueApplied Mechanics and Materials, 2013
- Soft-robotic arm inspired by the octopus: II. From artificial requirements to innovative technological solutionsBioinspiration & Biomimetics, 2012
- Design and Kinematic Modeling of Constant Curvature Continuum Robots: A ReviewThe International Journal of Robotics Research, 2010
- Design and Integration of a Telerobotic System for Minimally Invasive Surgery of the ThroatThe International Journal of Robotics Research, 2009
- Design of a biomimetic robotic octopus armBioinspiration & Biomimetics, 2009
- Active Hose: an artificial elephant's nose with maneuverability for rescue operation2002
- Computing a Trust Region StepSIAM Journal on Scientific and Statistical Computing, 1983