Evolution of the Cu2ZnSnS4 phase based on the sulfurization-crystallisation duration of the CuS/SnS/ZnS stack formed by thermal evaporation
Open Access
- 2 January 2023
- journal article
- research article
- Published by Taylor & Francis in Journal of Asian Ceramic Societies
- Vol. 11 (1) , 197-207
Abstract
Binary sulfides were deposited by sequential thermal evaporation with the stacking order glass/CuS/SnS/ZnS and subsequently subjected to a sulfurization-crystallization process, considering two thermal treatment time intervals, 5 and 20 min. The objective of implementing different annealing durations was to identify the best conditions to form CZTS films in the pure kesterite phase. After being subjected to the annealing, the films show structural characteristics of the kesterite phase. However, XRD data showed that prolonged annealing causes degradation of the kesterite phase, leading to the formation of traces of CuS and Cu5Sn2S7. The films annealed for shorter duration, in this case 5 min, present a denser and more uniform surface morphology, better degree of preferential orientation, small Urbach energy of 0.302 eV, and higher photosensitivity. The band gap of the films was 1.46 eV and 1.53 eV for annealing durations 5 and 20 min, respectively. Graphical abstractKeywords
This publication has 49 references indexed in Scilit:
- Obtaining phase-pure CZTS thin films by annealing vacuum evaporated CuS/SnS/ZnS stackJournal of Crystal Growth, 2016
- Solution processed Cu2SnS3 thin films for visible and infrared photodetector applicationsAIP Advances, 2016
- Phase evolution of Cu2ZnSnS4 (CZTS) kesterite thin films during the sulfurization processCeramics International, 2015
- Effects of annealing conditions on crystallization of the CZTS absorber and photovoltaic properties of Cu(Zn,Sn)(S,Se)2 solar cellsJournal of Alloys and Compounds, 2015
- Research on the photoresponse current and photosensitive properties of Cu2ZnSnS4 thin film prepared by sulfurization of a sputtered metal precursorRSC Advances, 2013
- Structural development and dynamic process in sulfurizing precursors to prepare Cu2ZnSnS4 absorber layerJournal of Alloys and Compounds, 2013
- Spray pyrolysed Cu2ZnSnS4 absorbing layer: A potential candidate for photovoltaic applicationsOptics & Laser Technology, 2013
- Influence of sintering temperature on screen printed Cu2ZnSnS4 (CZTS) filmsJournal of Alloys and Compounds, 2012
- Vibrational properties of stannite and kesterite type compounds: Raman scattering analysis of Cu2(Fe,Zn)SnS4Journal of Alloys and Compounds, 2012
- Studies on Cu2ZnSnS4 (CZTS) absorber layer using different stacking orders in precursor thin filmsSolar Energy Materials and Solar Cells, 2011