State-of-the-Art of Extreme Pressure Lubrication Realized with the High Thermal Diffusivity of Liquid Metal
- 6 February 2017
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 9 (6) , 5638-5644
Abstract
Sliding between two objects under very high load generally involves direct solid–solid contact at molecular/atomic level, the mechanism of which is far from clearly disclosed yet. Those microscopic solid–solid contacts could easily lead to local melting of rough surfaces. At extreme conditions, this local melting could propagate to the seizure and welding of the entire interface. Traditionally, the microscopic solid–solid contact is alleviated by various lubricants and additives based on their improved mechanical properties. In this work, we realized the state-of-the-art of extreme pressure lubrication by utilizing the high thermal diffusivity of liquid metal, 2 orders of magnitude higher than general organic lubricants. The extreme pressure lubrication property of gallium based liquid metal (GBLM) was compared with gear oil and poly-α-olefin in a four-ball test. The liquid metal lubricates very well at an extremely high load (10 kN, the maximum capability of a four-ball tester) at a rotation speed of 1800 rpm for a duration of several minutes, much better than traditional organic lubricants which typically break down within seconds at a load of a few kN. Our comparative experiments and analysis showed that this superextreme pressure lubrication capability of GBLM was attributed to the synergetic effect of the ultrafast heat dissipation of GBLM and the low friction coefficient of FeGa3 tribo-film. The present work demonstrated a novel way of improving lubrication capability by enhancing the lubricant thermal properties, which might lead to mechanical systems with much higher reliability.Keywords
Funding Information
- National Natural Science Foundation of China (11272177, 11422218, 51323006, 51425502)
This publication has 30 references indexed in Scilit:
- Recent advances in friction-stir welding – Process, weldment structure and propertiesProgress in Materials Science, 2008
- Adhesion and friction in gecko toe attachment and detachmentProceedings of the National Academy of Sciences, 2006
- Viscosity effect on GaInSn studied by XPSSurface and Interface Analysis, 2004
- On the Scuffing Failure of Hydrodynamic Bearings in the Presence of an Abrasive ContaminantJournal of Tribology, 1999
- Prediction of Scuffing Failure Based on Competitive Kinetics of Oxide Formation and Removal: Application to Lubricated Sliding of AISI 52100 Steel on SteelTribology Transactions, 1994
- The Fe-Ga (Iron-Gallium) systemBulletin of Alloy Phase Diagrams, 1990
- TribochemistryAnnual Review of Materials Science, 1988
- Gallium alloy as lubricant for high current density brushesIEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1988
- Gallium-Based Liquid-Metal Full-Film Lubricated Journal BearingsA S L E Transactions, 1985
- MAGNETOHYDRODYNAMIC LUBRICATION AND APPLICATION TO LIQUID METALSScientific Lubrication, 1963