Planar Cargo Control of Elastic Ship Cranes with the “Maryland Rigging” System
- 1 March 2007
- journal article
- research article
- Published by SAGE Publications in Journal of Vibration and Control
- Vol. 13 (3) , 241-267
Abstract
This article concerns cargo pendulation control of an elastic ship-mounted crane using the Maryland Rigging system. The boom luff angle, the length of the upper cable, and the position of its lower suspension point are used as inputs to control the planar vibrations of the elastic boom and the pendulation of the payload. The disturbances acting on the ship are represented by the rolling displacement of the ship due to sea motions and the force acting directly on the payload. The dynamic of the crane is described by a multi-model problem depending on the current values of the cable length and boom luff angle. Accordingly a variable-gain observer and a variable-gain controller are designed. The controller uses the estimated states and the measured roll angle to create the required damping and to compensate for the rolling motion of the ship. Simulation and experimental results showed that the expressed control strategy performs very well and has a significant effect in suppressing the vibrations for different operating conditions and payload masses.Keywords
This publication has 3 references indexed in Scilit:
- Feedback and feedforward control law for a ship crane with Maryland rigging system2000
- State estimation of dynamical systems with nonlinearities by using proportional-integral observerInternational Journal of Systems Science, 1995
- Detection of Cracks in Turborotors—A New Observer Based MethodJournal of Dynamic Systems, Measurement, and Control, 1993