Experimental Investigation of the Effect of Sweep on a Pitching Finite-Aspect-Ratio Wing

Authors:

Abstract
An experimental investigation of moderate sweep on three-dimensional dynamic stall of a pitching finite-aspect-ratio wing is performed by advanced measurement techniques. The flow fields are examined with Particle Image Velocimetry (PIV) and surface pressure is measured by intensity ratio-metric and single-shot lifetime fast pressure-sensitive paint (PSP) techniques. The wings have an aspect ratio AR=4 and a NACA 0012 section incorporating a rounded tip and three sweep angles = 0o, 15o, and 30o are investigated. The wings are 3D printed for PIV experiment and, to improve surface finish and resolution for PSP, aluminum machined airfoils with same aspect ratio and cross-section are used for the sweep angles 00 and 300. Freestream Mach number was M∞=0.1 and Reynolds number based on chord length was Rec=200000. The airfoil pitching motion is sinusoidal and experimental value of reduced frequency k =  f c/ U∞ = 0.1 was tested with the minimum and maximum angle of attack of pitching motion at 40 and 220, respectively. Details of flow structures for each swept case are captured at various phases using PIV at various spans and the average surface pressure map during pitching up and down cycle is obtained by PSP. For the three sweep angles the leading-edge and dynamics-stall vortices are observed on the wing surface and as the sweep angle increases the formation of vortices are formed towards the wing tip. Flow phase-coherence is studied using ensemble average statistics and proper orthogonal decomposition (POD) techniques on PIV data sets and different degrees of repeatability of the flow are found for each span location with the main structures persisting at every cycle. The phase average and instantaneous surface pressure maps are shown and described according to the phase-coherence and exposure time used and show distinct patterns during pitching cycle of the wing.

This publication has 19 references indexed in Scilit: