Thermal Hydraulic Analysis on the Water Lead Lithium Cooled Blanket for CFETR
Open Access
Abstract
A new type of Water Lead Lithium Cooled (WLLC) blanket that adopts the modular design scheme, water cooling the structure components, liquid PbLi as breeder and coolant, and SiC as the thermal insulator between PbLi and structures is under development as a candidate blanket concept for the Chinese Fusion Engineering Test Reactor (CFETR). Based on a poloidal-radial slice model, thermal hydraulic analysis is performed for this blanket to validate the feasibility of design goals. Results show that the present design can achieve the outlet temperature in the range of 600–700 °C, with all the material temperatures safely below the upper limits. A series of sensitivity analyses are also carried out. It indicates that the thermal conductivity (TC) of SiC would have a significant influence on the temperature field, streamlines and pressure drop; that is, lower TC of SiC can maintain the temperature of PbLi at a high level, and induce an increased number of vortices in the liquid PbLi flow as well as a larger pressure drop. On this basis, the joint effects of the TC of SiC and inlet velocity on the performance of blanket thermal hydraulics are analyzed, then the so-called “attainable region” is proposed. Finally, optimization design studies are carried out by decreasing the width of the front channel. Comparison results show that the present design is the most reasonable.Keywords
Funding Information
- The Comprehensive Research Facility for Fusion Technology (CRAFT) Program of China (No. 2018-000052-73-01-001228)
- The Science Foundation of ASIPP (No. DSJJ-2020-10)
This publication has 23 references indexed in Scilit:
- Thermal-hydraulic analysis on the whole module of water cooled ceramic breeder blanket for CFETRFusion Engineering and Design, 2016
- Dual-coolant lead–lithium (DCLL) blanket status and R&D needsFusion Engineering and Design, 2015
- Physical properties of F82H for fusion blanket designFusion Engineering and Design, 2014
- Preliminary thermal-hydraulic and safety analysis of China DFLL-TBM systemFusion Engineering and Design, 2013
- Numerical investigation of buoyant effect on flow and heat transfer of Lithium–Lead Eutectic in DFLL–TBMProgress in Nuclear Energy, 2012
- Characterization of key magnetohydrodynamic phenomena in PbLi flows for the US DCLL blanketFusion Engineering and Design, 2008
- Advanced power core system for the ARIES-AT power plantFusion Engineering and Design, 2007
- An experimental investigation of the density and thermal expansion of advanced materials and heat-transfer agents of liquid-metal systems of fusion reactor: Lead-lithium eutecticHigh Temperature, 2006
- An overview of dual coolant Pb–17Li breeder first wall and blanket concept development for the US ITER-TBM designFusion Engineering and Design, 2006
- Tauro: a ceramic composite structural material self-cooled Pb—17Li breeder blanket conceptJournal of Nuclear Materials, 1996