A Comprehensive Suppression Strategy for Common Ground Circulating Current Caused by Grounding Fault in PV Modules
- 26 March 2019
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 8 (3) , 3077-3089
Abstract
The widely distributed large-scale photovoltaic (PV) modules suffer from a large probability of grounding fault due to the reasons such as large area, short distance to the ground, complex series-parallel connection and exposure in natural weather, and the produced large common ground circulating current will damage the stability of the system. This problem has been well explored in this paper. Firstly, the generation mechanism of the common ground circulating current is analyzed, and the effect of the different DC-link voltage reference values on the stability of the system is revealed. Then a comprehensive suppression strategy is proposed to address the abovementioned problems. From the view of AC side, the common ground circulating current can be embodied through the zero-sequence component of the three-phase inductive current, thus a 0-axis based control strategy is proposed to suppress the common ground circulating current. From the view of DC side, the common ground circulating current will result in the difference between the output and input currents of PV modules, thus the common mode control strategy is proposed to solve the problem. The comprehensive method needs no status switching and needs no communication information of other modules, which can improve the stability of the system. Finally, the experimental results based on RT-LAB platform are presented to verify the effectiveness of the proposed control strategies.Keywords
Funding Information
- Key Research and Development Program of China (2018YFB0904700)
- Key research and development plan of Zhejiang Province (2017C01039)
This publication has 30 references indexed in Scilit:
- DC‐side fault detection for photovoltaic energy conversion system using fractional‐order dynamic‐error‐based fuzzy Petri net integrated with intelligent metersIET Renewable Power Generation, 2016
- Modelling, analysis and control design of a two‐stage photovoltaic generation systemIET Renewable Power Generation, 2016
- Online Two-Section PV Array Fault Diagnosis With Optimized Voltage Sensor LocationsIEEE Transactions on Industrial Electronics, 2015
- Comparative Evaluation of DC Fault-Mitigation Techniques in Large PV SystemsIEEE Journal of Photovoltaics, 2015
- A Control Strategy for Suppressing Circulating Currents in Parallel-Connected PMSM Drives With Individual DC LinksIEEE Transactions on Power Electronics, 2015
- A Comprehensive Review of Catastrophic Faults in PV Arrays: Types, Detection, and Mitigation TechniquesIEEE Journal of Photovoltaics, 2015
- Influences of Power Electronic Converters on Voltage–Current Behaviors During Faults in DGUs—Part II: Photovoltaic SystemsIEEE Transactions on Industry Applications, 2015
- Simplified PWM With Switching Constraint Method to Prevent Circulating Currents for Paralleled Bidirectional AC/DC Converters in Grid-Tied System Using Graphic AnalysisIEEE Transactions on Industrial Electronics, 2014
- DC Microgrid for Wind and Solar Power IntegrationIEEE Journal of Emerging and Selected Topics in Power Electronics, 2013
- A Biological Swarm Chasing Algorithm for Tracking the PV Maximum Power PointIEEE Transactions on Energy Conversion, 2010