Mechanical, Tribological, and Oxidation Resistance Properties of NiCrAlY Coating by Atmospheric Plasma Spraying
Open Access
- 8 May 2019
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Materials
- Vol. 6
Abstract
In this paper, NiCrAlY coating was prepared by atmospheric plasma spraying (APS), and the influence of heat treatment on the mechanical property, tribological property, and oxidation resistance property of coating was researched. The coating was heat-treated at 900 and 1,100°C, respectively. The microstructure of coating became more homogeneous after heat treatment. Meanwhile, heat treatment could effectively increase the microhardness and adhesive strength as well as decrease the porosity of coating. The coating presented the highest adhesive strength of 62.1 MPa and the lowest porosity of 3.06%, as well as excellent tribological property and oxidation resistance property at 900°C after 1,100°C heat treatment.Keywords
This publication has 27 references indexed in Scilit:
- Galvanically induced potentials to enable minimal tribochemical wear of stainless steel lubricated with sodium chloride and ionic liquid aqueous solutionFriction, 2018
- Effect of arc–current and spray distance on elastic modulus and fracture toughness of plasma-sprayed chromium oxide coatingsFriction, 2017
- Isothermal oxidation behavior and kinetics of thermal barrier coatings produced by cold gas dynamic spray techniqueSurface and Coatings Technology, 2017
- Tribology of NiCrAlY+Al2O3 composite coatings by plasma spraying with hybrid feeding of dry powder+suspensionWear, 2015
- Effect of alumina dispersion on oxidation behavior as well as friction and wear behavior of HVOF-sprayed CoCrAlYTaCSi coating at elevated temperature up to 1000 °CActa Materialia, 2015
- The influence of phase gradient within the micro arc oxidation (MAO) coatings on mechanical and tribological behaviorsSurface and Coatings Technology, 2015
- Post-treatment of Plasma-Sprayed Amorphous Ceramic Coatings by Spark Plasma SinteringJournal of Thermal Spray Technology, 2015
- Effects of Plastic Deformation on Isothermal Oxidation Behavior of CoNiCrAlY CoatingsScience of Advanced Materials, 2015
- Effect of bond coat and post-heat treatment on the adhesion of air plasma sprayed WC-Co coatingsSurface and Coatings Technology, 2015
- A new methodology for characterizing traction-separation relations for interfacial delamination of thermal barrier coatingsActa Materialia, 2014