Polypropylene and potato starch biocomposites: Physicomechanical and thermal properties
- 12 January 2011
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 120 (5) , 3078-3086
Abstract
To determine the possibility of using starch as biodegradable filler in the thermoplastic polymer matrix, starch‐filled polypropylene (PP) composites were prepared by extrusion of PP resin with 5, 10, 15, and 20 wt % of potato starch in corotating twin‐screw extruder. The extruded strands were cut into pellets and injection molded to make test specimens. These specimens were tested for physicomechanical properties such as tensile and flexural properties, Izod impact strength, density, and water absorption. These PP composites were further characterized by melt flow index (MFI), vicat softening point (VSP), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA) techniques. It was found that, with increase in starch content, tensile modulus, flexural strength, and flexural modulus of the PP composites increased along with the increase in moisture, water absorption, and density, while retaining the VSP; but, tensile strength and elongation, impact strength, hardness, and MFI of the PP composites also decreased. DSC analysis of the PP composite revealed the reduction in melting temperature, heat of fusion, and percentage of crystallization of PP with increase in starch content. Similarly, TGA traces display enhanced thermal degradability for PP as starch content increases. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011Keywords
This publication has 31 references indexed in Scilit:
- Mechanical, thermal and morphological properties of environmentally degradable ABS and poly(vinyl alcohol) blendsJournal of Applied Polymer Science, 2007
- Mechanical and thermal properties of polypropylene/sugarcane Bagasse compositesJournal of Applied Polymer Science, 2006
- Crosslinked poly(vinyl alcohol) and starch composite films. II. Physicomechanical, thermal properties and swelling studiesJournal of Applied Polymer Science, 2006
- A Study on the Properties of Starch/Glycerine BlendStarch - Stärke, 1998
- Studies on Chenopodium quinoa and Amaranthus paniculatas starch as biodegradable fillers in LDPE filmsCarbohydrate Polymers, 1996
- Shoes for growing feet.BMJ, 1978
- Fine structure of polyoma virus DNAJournal of Molecular Biology, 1977
- Employee Preferences For Job Characteristics.Academy of Management Proceedings, 1977
- Stress‐strain behavior of styrene‐acrylonitrile/glass bead composites in the glassy regionPolymer Engineering & Science, 1971
- Properties of a particulate‐filled polymerPolymer Engineering & Science, 1967