A new high intensity and short-pulse molecular beam valve
Authors:
- 1 February 2013
- journal article
- conference paper
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 84 (2) , 023102
Abstract
In this paper, we report on the design and performance of a new home-built pulsed gas valve, which we refer to as the Nijmegen Pulsed Valve (NPV). The main output characteristics include a short pulse width (as short as 20 μs) combined with operating rates up to 30 Hz. The operation principle of the NPV is based on the Lorentz force created by a pulsed current passing through an aluminum strip located within a magnetic field, which opens the nozzle periodically. The amplitude of displacement of the opening mechanism is sufficient to allow the use of nozzles with up to 1.0 mm diameter. To investigate the performance of the valve, several characterizations were performed with different experimental methods. First, a fast ionization gauge was used to measure the beam intensity of the free jet emanating from the NPV. We compare free jets from the NPV with those from several other pulsed valves in current use in our laboratory. Results showed that a high intensity and short pulse-length beam could be generated by the new valve. Second, the NPV was tested in combination with a skimmer, where resonance enhanced multiphoton ionization combined with velocity map imaging was used to show that the NPV was able to produce a pulsed molecular beam with short pulse duration (∼20 μs using 0.1% NO/He at 6 bars) and low rotational temperature (∼1 K using 0.5% NO/Ar at 6 bars). Third, a novel two-point pump-probe method was employed which we label double delay scan. This method allows a full kinematic characterization of the molecular beam, including accurate speed ratios at different temporal positions. It was found that the speed ratio was maximum (S = 50 using 0.1% NO/He at 3 bars) at the peak position of the molecular beam and decreased when it was on the leading or falling edge.Keywords
This publication has 17 references indexed in Scilit:
- Generation and Propagation of Intense Supersonic BeamsThe Journal of Physical Chemistry A, 2011
- A short pulse (7 μs FWHM) and high repetition rate (dc-5kHz) cantilever piezovalve for pulsed atomic and molecular beamsReview of Scientific Instruments, 2009
- A compact molecular beam machineReview of Scientific Instruments, 2009
- In situ characterization of a cold and short pulsed molecular beam by femtosecond ion imagingPhysical Chemistry Chemical Physics, 2009
- Towards coherent control of supersonic beams: a new approach to atom opticsNew Journal of Physics, 2006
- High harmonic generation at 1 kHz repetition rate with a pulsed valveApplied Physics B, 2001
- An intense pulsed electrical discharge source for OH molecular beamsChemical Physics Letters, 2001
- Performance of a solenoid-driven pulsed molecular-beam sourceReview of Scientific Instruments, 1995
- A high-intensity multi-purpose piezoelectric pulsed molecular beam sourceReview of Scientific Instruments, 1989
- A fast (30μs) pulsed supersonic nozzle beam source: application to the photodissociation of CS2at 193 nmJournal of Physics E: Scientific Instruments, 1986