Mechanical and Thickness Swelling of Particleboard Composites Made from Three-Year-Old Poplar Clones
- 17 November 2008
- journal article
- Published by SAGE Publications in Journal of Reinforced Plastics and Composites
- Vol. 29 (4) , 481-489
Abstract
Particleboards were produced from three-year-old poplar clones (e.g., Populus euramericana.costanzo, Populus euramericana. 561.41, Populus euramericana triplo, Populus euramericana vernirubensis, Populus euramericana marilandica, Populus euramericana. I-214, Populus deltoides 77.51, Populus trichocarpa, Populus nigra. betulifolia). One-layer laboratory particleboards were made with the above materials, with, board density of 0.7 gr/cm3, the resin type of (UF), a hardener content of (1%), a hardener type of (NH 4Cl), a press pressure of 30 kg/cm2, and a press temperature of 160°C. Modulus of elasticity (MOE) and modulus of rupture (MOR), internal bond strength (IB). Thickness swelling of the specimens were tested according to EN Standard. Overall results showed that most panels made from above materials exceeded the EN Standards for IB, MOE, and MOR. However, thickness swelling (TS) values were higher (poor) than requirements. The highest MOR, MOE, IB were reached with P.e. costanzo, P.e. 561.41, P.e. vernirubensis and P. trichocarpa poplar clones. The lowest TS 2 h and TS 24 h were reached with P.e. 561.41 and I-214 of the three-year-old poplar clones. Most types of panels made in this study covered the MOE, MOR, and IB strength requirements for interior fitments stated in the EN Standards. Nevertheless, the TS of the panels were very poor. Poplar clone panels are suitable for interior decoration (furniture, wall, and ceiling paneling).Keywords
This publication has 20 references indexed in Scilit:
- Medium‐density particleboards from rice husks and soybean protein concentrateJournal of Applied Polymer Science, 2007
- Effects of steaming process on some properties of eucalyptus particleboard bonded with UF and MUF adhesivesBuilding and Environment, 2007
- Bioprocess preparation of wheat straw fibers and their characterizationIndustrial Crops and Products, 2006
- Properties of particleboard bond with rice bran and polymeric methylene diphenyl diisocyanate adhesivesIndustrial Crops and Products, 2006
- Manufacture and properties of binderless particleboard from bagasse I: effects of raw material type, storage methods, and manufacturing processJournal of Wood Science, 2005
- Adhesive properties of modified soybean flour in wheat straw particleboardComposites Part A: Applied Science and Manufacturing, 2004
- Characterization and utilisation of vine prunings as a wood substitute for particleboard productionIndustrial Crops and Products, 2002
- Low density particleboard from wheat straw and corn pithIndustrial Crops and Products, 2002
- Compression and tensile strength of low-density straw-protein particleboardIndustrial Crops and Products, 2001
- Heat post-treatment to reduce thickness swelling of particleboard from fast-growing poplarsJournal of Forestry Research, 1997