Discrete element method modeling of inherently anisotropic rocks under uniaxial compression loading
Authors:
- 11 November 2015
- journal article
- research article
- Published by Wiley in International Journal for Numerical and Analytical Methods in Geomechanics
- Vol. 40 (8) , 1150-1183
Abstract
Summary: A new numerical approach is proposed in this study to model the mechanical behaviors of inherently anisotropic rocks in which the rock matrix is represented as bonded particle model, and the intrinsic anisotropy is imposed by replacing any parallel bonds dipping within a certain angle range with smooth‐joint contacts. A series of numerical models with β = 0°, 15°, 30°, 45°, 60°, 75°, and 90° are constructed and tested (β is defined as the angle between the normal of weak layers and the maximum principal stress direction). The effect of smooth‐joint parameters on the uniaxial compression strength and Young's modulus is investigated systematically. The simulation results reveal that the normal strength of smooth‐joint mainly affects the behaviors at high anisotropy angles (β > 45°), while the shear strength plays an important role at medium anisotropy angles (30°–75°). The normal stiffness controls the mechanical behaviors at low anisotropy angles. The angle range of parallel bonds being replaced plays an important role on defining the degree of anisotropy. Step‐by‐step procedures for the calibration of micro parameters are recommended. The numerical model is calibrated to reproduce the behaviors of different anisotropic rocks. Detailed analyses are conducted to investigate the brittle failure process by looking at stress‐strain behaviors, increment of micro cracks, initiation and propagation of fractures. Most of these responses agree well with previous experimental findings and can provide new insights into the micro mechanisms related to the anisotropic deformation and failure behaviors. The numerical approach is then applied to simulate the stress‐induced borehole breakouts in anisotropic rock formations at reduced scale. The effect of rock anisotropy and stress anisotropy can be captured. Copyright © 2015 John Wiley & Sons, Ltd.Keywords
Funding Information
- Natural Science Fund of China (51428902)
- Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences (Z014004)
This publication has 55 references indexed in Scilit:
- Anisotropic strength and deformational behavior of Himalayan schistsInternational Journal of Rock Mechanics and Mining Sciences, 2003
- A failure criterion for transversely isotropic rocksInternational Journal of Rock Mechanics and Mining Sciences, 2001
- On failure criteria for anisotropic cohesive‐frictional materialsInternational Journal for Numerical and Analytical Methods in Geomechanics, 2001
- Effect of planar structures on the anisotropy of Ranyah sandstone, Saudi ArabiaEngineering Geology, 1998
- Assessment of some failure criteria for strongly anisotropic geomaterialsMechanics of Cohesive-frictional Materials, 1998
- Laboratory investigation of the mechanical behaviour of Tournemire shaleInternational Journal of Rock Mechanics and Mining Sciences, 1997
- Importance of anisotropy when estimating and measuring in situ stresses in rockInternational Journal of Rock Mechanics and Mining Sciences, 1996
- An investigation into the tensile behaviour of a schistose rockInternational Journal of Rock Mechanics and Mining Sciences, 1990
- Intrinsic shear strength of a brittle, anisotropic rock—IInternational Journal of Rock Mechanics and Mining Sciences, 1974
- Shear Failure of Anistropic RocksGeological Magazine, 1960