Pico- to nanosecond pulsed laser-induced forward transfer (LIFT) of silver nanoparticle inks: a comparative study
Open Access
- 7 November 2019
- journal article
- research article
- Published by Springer Nature in Applied Physics A
- Vol. 125 (12) , 1-11
Abstract
Silver nanoparticle inks are among the key functional materials used in printed electronics. Depositing it by laser-induced forward transfer remains a challenging task because the non-linear rheological nature of these inks narrows the range of the laser processing parameters. Understanding, therefore, the influence of the laser parameters on the ejection dynamics and deposition quality is of critical importance. The influence of the laser pulse duration from pico- to nanosecond-laser-induced jet dynamics was investigated using time-resolved shadowgraphy imaging. Jet speed and surface area analyses showed that in the lower laser fluence level range, picosecond pulses induce higher surface area ejections which propagate at higher velocities. As the laser fluence levels were increased, the difference in jet velocity and surface area evolutions narrows. Deposition analysis showed a similar behavior with lower transfer thresholds and larger depositions at lower fluence range when picosecond-laser pulses were used.Keywords
Funding Information
- Nederlandse Organisatie voor Wetenschappelijk Onderzoek (14641)
This publication has 42 references indexed in Scilit:
- Laser-induced forward transfer of silver nanoparticle ink: time-resolved imaging of the jetting dynamics and correlation with the printing qualityMicrofluidics and Nanofluidics, 2013
- Laser Printing of Skin Cells and Human Stem CellsTissue Engineering Part C: Methods, 2009
- Properties of humidity sensing ZnO nanorods-base sensor fabricated by screen-printingSensors and Actuators B: Chemical, 2008
- Microdroplet deposition of copper film by femtosecond laser-induced forward transferApplied Physics Letters, 2006
- Effects of Fluid Properties on Dispensing Processes for Electronics PackagingIEEE Transactions on Electronics Packaging Manufacturing, 2006
- Ink‐jet printing: The route to production of full‐color P‐OLED displaysJournal of the Society for Information Display, 2006
- Laser ablation and micromachining with ultrashort laser pulsesIEEE Journal of Quantum Electronics, 1997
- Deposition of Poly(methyl methacrylate) Films by UV Laser AblationMacromolecules, 1995
- Laser-induced forward transfer: A new approach for the deposition of high Tc superconducting thin filmsJournal of Materials Research, 1989
- The Theoretical Fundamentals of the Screen Printing ProcessHybrid Circuits, 1989