Phase-Separated Inorganic-Organic Hybrids for Microelectronic Applications
Authors:
- R.D. MillerRMR.D. Miller
- J.L. HedrickJHJ.L. Hedrick
- D.Y. YoonDYD.Y. Yoon
- R.F. CookRCR.F. Cook
- J.P. HummelJHJ.P. Hummel
- 1 October 1997
- journal article
- Published by Springer Nature in MRS Bulletin
- Vol. 22 (10) , 44-48
Abstract
As on-chip device densities increase and active device dimensions shrink, signal delays and noise increase due to capacitive coupling and crosstalk between the metal interconnections. Since delays, noise, and power consumption all depend critically on the dielectric constant of the separating insulator, much attention has focused recently on replacing standard silicon dioxide with new intermetal dielectrics (IMDs) having dielectric constants considerably lower than conventional oxide (k = 3.9–4.2). On-chip silicon dioxide insulators are currently deposited by gas-phase techniques such as chemical vapor deposition or plasma-enhanced chemical vapor deposition. Silicate films may also be formed at lower temperatures by sol-gel procedures. In the sol-gel process, typically an orthosilicate ester is hydrolyzed with water. This often occurs in an organic solvent to form a soluble, partially condensed polymer (sol) that can be spun on a substrate to produce a solvent-containing film. Subsequent solvent removal and curing results in the silicate film. The process involves hydrolysis to generate polyfunctional silanols followed by condensation polymerization to eventually yield a gel. Since both processes involve the substantial loss of volatile materials, considerable shrinkage occurs (75–85% is typical). Inhomogeneity of shrinkage or shrinkage on constraining substrates can often lead to cracking unless the films are very thin (often μm). In the sol-gel process, a variety of techniques are employed to avoid capillary-driven cracking forces, including (1) very slow drying, (2) drying with supercritical fluids, or (3) chemically controlled condensation.Keywords
This publication has 10 references indexed in Scilit:
- Heterocycle-Activated Aromatic Nucleophilic Substitution of AB2 Poly(aryl ether phenylquinoxaline) Monomers. 3Macromolecules, 1996
- SilsesquioxanesChemical Reviews, 1995
- Hybrid Nanocomposite Materials—between inorganic glasses and organic polymersAdvanced Materials, 1993
- Synthesis of Polyimide-Silicate Hybrids Via Sol-Gel Ultrastructure ProcessingMRS Proceedings, 1989
- Thin-Film Packaging1989
- Synthesis and properties of fluorine-containing aromatic polybenzoxazoles from bis(o-aminophenols) and aromatic diacid chlorides by the silylation methodMacromolecules, 1988
- Drying gelsJournal of Non-Crystalline Solids, 1986
- Polyhedral oligosilsesquioxanes and their homo derivatives1982
- Polymer Blends and Composites1976
- Rubber-Toughened Plastics1976