Online Continuous Measurement of the Operating Deflection Shape of Power Transmission Belts Through Electrostatic Charge Sensing
Authors:
- 4 January 2017
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 66 (3) , 492-501
Abstract
The measurement of the operating deflection shape (ODS) of power transmission belts is of great importance for the fault diagnosis and prognosis of industrial belt drive systems. This paper presents a novel method based on an electrostatic sensor array to measure the ODS of a belt moving both axially and transversely. The electrostatic sensor integrates a charge amplifier that converts the induced charge on a strip-shaped electrode into a voltage signal. Finite-element simulations are performed to study the sensing characteristics of the sensor and the results reveal that the sensor can respond to vibration displacement. Construction of the ODS is achieved in the frequency domain using the ODS frequency response function. Comparative experimental studies with a high-accuracy laser displacement sensor were conducted on a purpose-built test rig and the results show that the vibration frequencies and their relative magnitudes obtained from both sensors agree well with each other. Experiments conducted over a range of belt axial speeds show that the belt vibrates at frequencies that are well separated and identifiable using a peak picking method. The measured ODSs of the first three vibration modes illustrate that the vibration displacement is larger in the middle of the belt span than at both ends and that the phase shift relative to the reference sensor at each measurement point increases monotonically along the belt running direction. The belt axial speed determines the vibration frequencies and displacement, which reaches the maximum amplitude around the natural frequency of the belt.Keywords
Funding Information
- National Natural Science Foundation of China (51375163, 61573140)
- Fundamental Research Funds for the Central Universities (2016MS32)
- Chinese Ministry of Education for providing financial support for this research (B13009)
This publication has 16 references indexed in Scilit:
- On the Transverse, Low Frequency Vibrations of a Traveling String With Boundary DampingJournal of Vibration and Acoustics, 2015
- Multi-frequency, 3D ODS measurement by continuous scan laser Doppler vibrometryMechanical Systems and Signal Processing, 2015
- Dynamics of axially moving continuaInternational Journal of Mechanical Sciences, 2014
- Experimental study of the nonlinear characteristics of an axially moving stringJournal of Vibration and Control, 2014
- Non-contact strip speed measurement using electrostatic sensing and correlation signal-processing techniquesMeasurement Science and Technology, 2011
- Scaling the Operating Deflection Shapes Obtained from Scanning Laser Doppler VibrometerJournal of Nondestructive Evaluation, 2011
- Performance monitoring of the Geumdang Bridge using a dense network of high-resolution wireless sensorsSmart Materials and Structures, 2006
- Analysis and Control of Transverse Vibrations of Axially Moving StringsApplied Mechanics Reviews, 2005
- A new approach to the measurement of transverse vibration and acoustic radiation of automotive belts using laser Doppler vibrometry and acoustic intensity techniquesMeasurement Science and Technology, 2001
- NON-LINEAR VIBRATION OF POWER TRANSMISSION BELTSJournal of Sound and Vibration, 1997