Effect of the conversion of the plastic deformation work to heat on the behaviour of TWIP steels: a review
Author:
Open Access
- 2 May 2023
- journal article
- review article
- Published by Springer Nature in Archives of Civil and Mechanical Engineering
- Vol. 23 (2) , 1-18
Abstract
The study discusses the subject of a temperature change of TWIP steels during their deformation as a result of a conversion of the plastic deformation work into heat, based on a literature review and the authors' own research. The methods of measuring or modelling the changes of these temperatures are presented. It also points out that the heat generated during plastic deformation of TWIP steels has higher values than in the case of conventional steels, due to their higher yield stresses and limit strains. The heat has a very important effect on the microstructure of the deformed material and thus also on its properties. Its high increase can lead to e.g. a change of the deformation mechanism from twinning to dislocation glide, which is also connected with worse workability and thus also the energy consumption of the bodywork elements. On the basis of the selected literature works, the study determines the possible microstructural changes of TWIP steels related to the generated heat and demonstrates that materials with similar chemical compositions can behave differently at high deformation rates.Keywords
Funding Information
- Narodowe Centrum Nauki (UMO-2019/35/B/ST8/02184)
This publication has 48 references indexed in Scilit:
- Application of Thermography to Analyse the Influence of the Deformation Speed in the Forming ProcessProcedia Engineering, 2013
- On the origin of dynamic strain aging in twinning-induced plasticity steelsActa Materialia, 2011
- Dependence of tensile deformation behavior of TWIP steels on stacking fault energy, temperature and strain rateActa Materialia, 2010
- Analysis of inertia and scale effects on dynamic neck formation during tension of sheet steelActa Materialia, 2005
- The deformation processing map for control of microstructure in CuAl9.2Fe3 aluminium bronzeJournal of Materials Processing Technology, 2002
- Physical and mathematical modelling of extrusion processesJournal of Materials Processing Technology, 2000
- Shock-induced deformation twinning in tantalumActa Materialia, 1997
- THERMAL SOFTENING EFFECTS IN TYPE 224 CARBON STEELJournal de Physique IV, 1991
- Relationship between extrinsic stacking faults and mechanical twinning in F.C.C. solid solutions with low stacking fault energyJournal de Physique, 1984
- The latent energy remaining in a metal after cold workingProceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character, 1934