Pressure-Assisted Sulfuric Acid Attack in Cementitious Materials: Mechanical Degradation, and Microstructural Evolution
Authors:
- Erfan SafariESErfan Safari
- Aref Ziaadiny-DashtkhakiAZAref Ziaadiny-Dashtkhaki
- Vahab ToufighVTVahab Toufigh
Preprint
- 19 October 2026
- preprint
- Published by Elsevier in SSRN Electronic Journal
Abstract
Coupled chemical and hydraulic loading strongly influences cementitious durability in deep underground and hydraulic systems. While sulfuric acid attack and hydrostatic pressure are well-studied separately, their combined influence on transport-driven degradation remains unclear. This study experimentally investigates the coupled effects of hydrostatic pressure and sulfuric acid exposure on ordinary Portland cement concrete (OPCC) and cement paste (CP). Specimens were exposed to a 25% sulfuric acid solution under hydrostatic pressures ranging from 0 to 50 bar for 21 days using a custom-designed high-pressure chamber. Degradation was evaluated through mass loss, compressive strength, energy absorption, and SEM–EDS microstructural characterization. Hydrostatic pressure significantly accelerated acid-induced deterioration in both materials by enhancing fluid transport through pores and microcracks, but the two materials exhibited markedly different mechanical responses. Compressive strength declined by 8.6% in OPCC (28.1 to 25.7 MPa) between 0 and 50 bar, compared with a 46.8% decline in CP (30.6 to 16.3 MPa); absorbed energy fell by 9.2% in OPCC versus 56.9% in CP over the same range. Two-way analysis of variance confirmed a statistically significant material×pressure interaction for both properties (p < 0.001), showing that CP is disproportionately, not merely additively, more pressure-sensitive than OPCC. Weight loss increased with pressure in both materials (OPCC: 10.9% to 19.9%; CP: 17.8% to 25.9%), but at statistically similar rates,. SEM–EDS confirmed pressure-enhanced sulfur penetration and decalcification of the cement matrix, consistent with a two-stage sequence where surface-limited gypsum formation governs early mass loss while pressure-driven internal decalcification governs mechanical performance loss. This coupled pathway defines the pressure-dependent durability response and provides a basis for resilient infrastructure design.Keywords
This publication has 29 references indexed in Scilit:
- Experimental study of concrete damage under high hydrostatic pressureCement and Concrete Research, 2017
- Comparative analysis of biogenic and chemical sulfuric acid attack on hardened cement paste using laser ablation-ICP-MSCement and Concrete Research, 2016
- Degradation modelling of concrete submitted to sulfuric acid attackCement and Concrete Research, 2013
- Life‐cycle reliability of RC bridge piers under seismic and airborne chloride hazardsEarthquake Engineering & Structural Dynamics, 2011
- Durability of concrete exposed to leaching and external sulphate attacksCement and Concrete Research, 2009
- Using limestone aggregates and different cements for enhancing resistance of concrete to sulphuric acid attackCement and Concrete Research, 2005
- Apparatus for accelerated degradation testing of concrete specimensMaterials and Structures, 2002
- The effects of aggressive water on dam concreteConstruction and Building Materials, 1990
- Durability of concrete structures in acidic waterCement and Concrete Research, 1989
- The performance of cement paste and concrete subjected to sulphuric acid attackCement and Concrete Research, 1988