Deep penetration welding with high power disk lasers in low vacuum
- 1 January 2011
- conference paper
- Published by Laser Institute of America
- Vol. 2011 (1) , 669
Abstract
High-power and high-brightness lasers such as disk and fiber lasers are recently developed to produce deep penetration welds. This study was therefore performed to produce deep-penetration weld beads by using high power disk lasers of 10 kW and 16 kW respectively or combined lasers, and a newly developed vacuum chamber with rotary pumps. It was consequently revealed that deeply-penetrated sound weld beads of 50 and 70 mm depth could be produced in Type 304 stainless steel under the conditions of 16 and 26 kW, 0.3 m/min and 0.1 kPa, respectively. Moreover, sound full-penetration weld beads without hot cracks and underfills could be made in HT980 high tensile strength steel plate of 23 mm in thickness.Keywords
This publication has 6 references indexed in Scilit:
- Development of Deep Penetration Welding Technology with High Brightness Laser under VacuumPhysics Procedia, 2011
- Deep penetration welding with high power laser under vacuum2010
- Laser beam welding in vacuum – A process variation in comparison with electron beam welding2010
- High quality welding of stainless steel with 10 kW high power fibre laserScience and Technology of Welding and Joining, 2009
- Welding with fiber lasers from 200 to 17000 W2005
- Effect of vacuum on penetration and defects in laser weldingJournal of Laser Applications, 2001