Study of transformer winding deformation by frequency response analysis
Authors:
- 1 January 2013
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 19325517,p. 1-5
Abstract
This paper proposes a methodology to interpret frequency response measurements of a deformed transformer winding due to conductors tilt. To achieve that, geometrical parameters of a three phase prototype transformer is used to simulate the frequency response of one of the windings using the multi-conductor transmission line model. To simulate the response, inter-turn, inter-disc and inter-winding capacitances of the winding based on normal and deformed conditions are computed using finite element method. Using the computed values, the frequency response for both normal and deformed conditions are simulated. The simulated responses are studied by subdividing into four frequency regions and compared using the correlation coefficient. For further analysis, the vector fitting algorithm was implemented to approximate the transfer function of each response. All transfer functions are then represented in the Nyquist diagram to analyse the shape of each plot. From the Nyquist diagram, it was observed that the real minimum of each plot increases as the winding deformation increases. This finding can be used to estimate the winding deformation severity based on the plotted attributes.Keywords
This publication has 10 references indexed in Scilit:
- A study on suitability of different transformer winding models for frequency response analysis2012
- A New Method for Detection and Evaluation of Winding Mechanical Faults in Transformer through Transfer Function MeasurementsAdvances in Electrical and Computer Engineering, 2011
- Mathematical Comparison Methods to Assess Transfer Functions of Transformers to Detect Different Types of Mechanical FaultsIEEE Transactions on Power Delivery, 2010
- Experimental and theoretical investigation of disc space variation in real high-voltage windings using transfer function methodIET Electric Power Applications, 2010
- Localization of winding radial deformation and determination of deformation extent using vector fitting‐based estimated transfer functionEuropean Transactions on Electrical Power, 2008
- Determination of axial displacement extent based on transformer winding transfer function estimation using vector‐fitting methodEuropean Transactions on Electrical Power, 2007
- Using Cross-Correlation Coefficients to Analyze Transformer Sweep Frequency Response Analysis (SFRA) Traces2007
- Transformer Engineering2004
- Transfer function method to diagnose axial displacement and radial deformation of transformer windingsIEEE Transactions on Power Delivery, 2003
- Rational approximation of frequency domain responses by vector fittingIEEE Transactions on Power Delivery, 1999