Characterization of intra‐ply shear behaviors of unidirectional prepregs during hot diaphragm forming process
- 23 November 2020
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 42 (2) , 1008-1020
Abstract
Intra‐ply shear is the most important deformation mode in composite sheet forming. In this study, the intra‐ply shear behaviors of cross‐ply unidirectional carbon fiber/epoxy prepregs under double diaphragm compaction at different temperatures and cross‐head rates were investigated by a home‐made testing system. The experimental test results indicate that uniform temperature distribution and low forming speed in double diaphragm process help to obtain high‐quality products. A modified model based on the temperature, cross‐head rate and the level of compaction was proposed for shear angle prediction. Then fifth‐degree polynomial and power functions combined with two rate‐independent theories were used to calculate the shear force and modulus. The shear force and shear modulus are strongly influenced by the function that describing the relationship between the shear force and shear angle.Keywords
Funding Information
- National Natural Science Foundation of China (11872086)
This publication has 29 references indexed in Scilit:
- On the interply friction of different generations of carbon/epoxy prepreg systemsComposites Part A: Applied Science and Manufacturing, 2011
- A contribution to the analysis of the intrinsic shear behavior of fabricsJournal of Composite Materials, 2010
- Normalization of Shear Test Data for Rate-independent Compressible FabricsJournal of Composite Materials, 2008
- Characterization of mechanical behavior of woven fabrics: Experimental methods and benchmark resultsComposites Part A: Applied Science and Manufacturing, 2008
- Experimental analysis of the influence of tensions on in plane shear behaviour of woven composite reinforcementsComposites Science and Technology, 2008
- Intra-ply shear locking in finite element analyses of woven fabric forming processesComposites Part A: Applied Science and Manufacturing, 2006
- Shear characterisation of viscous woven textile composites: a comparison between picture frame and bias extension experimentsComposites Science and Technology, 2004
- Evaluation of bias-extension and picture-frame test methods for the measurement of intraply shear properties of PP/glass commingled fabricsComposite Structures, 2003
- Beyond the pin-jointed net: maximising the deformability of aligned continuous fibre reinforcementsComposites Part A: Applied Science and Manufacturing, 2002
- Bias extension measurements on cross-plied unidirectional prepregComposites Part A: Applied Science and Manufacturing, 2002