Flame Synthesis of Nanosized Cu−Ce−O, Ni−Ce−O, and Fe−Ce−O Catalysts for the Water-Gas Shift (WGS) Reaction
- 3 November 2009
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 1 (11) , 2624-2635
Abstract
A flame synthesis method has been used to prepare nanosized, high-surface-area Cu−Ce−O, Ni−Ce−O, and Fe−Ce−O catalysts from aqueous solutions of metal acetate precursors. The particles were formed by vaporization of the precursors followed by reaction and then gas to particle conversion. The specific surface areas of the synthesized powders ranged from 127 to 163 m2/g. High-resolution transmission electron microscope imaging showed that the particle diameters for the ceria materials are in the range of 3−10 nm, and a thin layer of amorphous material was observed on the surface of the particles. The presence and surface enrichment of the transition-metal oxides (CuO, NiO, and Fe2O3) on the ceria particles were detected using X-ray photoelectron spectroscopy. Electron energy-loss spectroscopic studies suggest the formation of a core−shell structure in the as-prepared particles. Extended X-ray absorption fine structure studies suggest that the dopants in all M−Ce−O systems are almost isostructural with their oxide counterparts, indicating the doping materials form separate oxide phases (CuO, Fe2O3, NiO) within the host matrix (CeO2). Etching results confirm that most of the transition-metal oxides are present on the surface of CeO2, easily dissolved by nitric acid. The performance of the flame-synthesized catalysts was examined toward water-gas shift (WGS) activity for fuel processing applications. The WGS activity of metal ceria catalysts decreases in the order Cu−Ce−O > Ni−Ce−O > Fe−Ce−O > CeO2 with a feed mixture having a hydrogen to carbon monoxide (H2/CO) ratio of 1. There was no methane formation for these catalysts under the tested conditions.Keywords
This publication has 58 references indexed in Scilit:
- Preparation and characterization of α-Fe2O3–CeO2 compositeMaterials Characterization, 2009
- Comparative Study on Catalytic Performances for Low-temperature CO Oxidation of Cu–Ce–O and Cu–Co–Ce–O CatalystsCatalysis Letters, 2008
- In Situ Time-Resolved Characterization of Ni−MoO2 Catalysts for the Water−Gas Shift ReactionThe Journal of Physical Chemistry C, 2008
- Electrodes and performance analysis of a ceria electrolyte SOFCSolid State Ionics, 2002
- Thermophoresis-assisted vapour phase synthesis of CeO2 and CexY1−xO2−δ nanoparticlesSolid State Ionics, 1999
- Microstructural studies of nanocrystalline CeO2 produced by gas condensationNanostructured Materials, 1997
- Heteroepitaxial growth of α-Fe2O3, γ-Fe2O3 and Fe3O4 thin films by oxygen-plasma-assisted molecular beam epitaxyJournal of Crystal Growth, 1997
- Catalytic Properties of Ceria and CeO2-Containing MaterialsCatalysis Reviews, 1996
- Synthesis of nanostructured catalytic materials using a modified magnetron sputtering techniqueNanostructured Materials, 1994
- In situ cell for combined XRD and on-line catalysis tests: Studies of Cu-based water gas shift and methanol catalystsJournal of Catalysis, 1991