Ultrasonic Inspection of Solid Composite Laminates Using a One-Sided Pitch-Catch Contact Mode

Authors:

Abstract
Ultrasonic NDE of composite laminates is often based on the backwall echoes of the sample. In the inspection of actual composite hardware, the back surface of the part may be curved or contain a complex geometry that does not provide a usable backwall echo. In this work, a one‐sided pitch‐catch setup was used in the detection and evaluation of flaws and material anomalies in solid composite laminates. Two miniature potted Rayleigh wave transducers (for generating surface waves in contact mode on steel) were joined head‐to‐head and used in the pitch‐catch mode on the surface of composites. The pitch‐catch signal was found to be more sensitive than a normal incidence backwall echo of a longitudinal wave to detect subtle flaw conditions in the composite, including low level porosity, ply waviness, and cracks. The depth of the sampling volume that the pitch‐catch signal came from was relatively shallow to the head‐to‐head miniature Rayleigh probes, but the depth can be increased by increasing the separation distance of the transmitting and receiving probes. With the aid of the manual Generic Scanner (“GenScan”) developed by CNDE at Iowa State University, the one‐sided pitch‐catch probe may also be used to produce C‐scan images.