Optimization of dye adsorption time and film thickness for efficient ZnO dye-sensitized solar cells with high at-rest stability
Open Access
- 28 December 2012
- journal article
- Published by Springer Nature in Discover Nano
- Vol. 7 (1) , 688
Abstract
Photoelectrodes for dye-sensitized solar cells were fabricated using commercially available zinc oxide (ZnO) nanoparticles and sensitized with the dye N719. This study systematically investigates the effects of two fabrication factors: the ZnO film thickness and the dye adsorption time. Results show that these two fabrication factors must be optimized simultaneously to obtain efficient ZnO/N719-based cells. Different film thicknesses require different dye adsorption times for optimal cell performance. This is because a prolonged dye adsorption time leads to a significant deterioration in cell performance. This is contrary to what is normally observed for titanium dioxide-based cells. The highest overall power conversion efficiency obtained in this study was 5.61%, which was achieved by 26-μm-thick photoelectrodes sensitized in a dye solution for 2 h. In addition, the best-performing cell demonstrated remarkable at-rest stability despite the use of a liquid electrolyte. Approximately 70% of the initial efficiency remained after more than 1 year of room-temperature storage in the dark. To better understand how dye adsorption time affects electron transport properties, this study also investigated cells based on 26-μm-thick films using electrochemical impedance spectroscopy (EIS). The EIS results show good agreement with the measured device performance parameters.Keywords
This publication has 47 references indexed in Scilit:
- Enhancing performance of ZnO dye-sensitized solar cells by incorporation of multiwalled carbon nanotubesDiscover Nano, 2012
- Nanostructured photoelectrodes for dye-sensitized solar cellsNano Today, 2011
- Aggregation of indoline dyes as sensitizers for ZnO solar cellsJournal of Photochemistry and Photobiology A: Chemistry, 2010
- Materials, Interfaces, and Photon Confinement in Dye-Sensitized Solar CellsThe Journal of Physical Chemistry B, 2010
- A novel maskless approach towards aligned, density modulated and multi-junction ZnO nanowires for enhanced surface area and light trapping solar cellsNanotechnology, 2010
- Double‐Layered Photoanodes from Variable‐Size Anatase TiO2 Nanospindles: A Candidate for High‐Efficiency Dye‐Sensitized Solar CellsAngewandte Chemie International Edition, 2010
- Influence of light scattering particles in the TiO2 photoelectrode for solid-state dye-sensitized solar cellJournal of Photochemistry and Photobiology A: Chemistry, 2008
- Electrophoretically Deposited TiO2 Nanotube Light-Scattering Layers of Dye-Sensitized Solar CellsJapanese Journal of Applied Physics, 2008
- The Fabrication of an Upright‐Standing Zinc Oxide Nanosheet for Use in Dye‐Sensitized Solar CellsAdvanced Materials, 2005
- Photoelectrochemical Properties of a Porous Nb2O5 Electrode Sensitized by a Ruthenium DyeChemistry of Materials, 1998