Integrating response surface methodology and machine learning for analyzing the unconventional machining properties of hybrid fiber‐reinforced composites
- 1 February 2024
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 45 (7) , 6077-6092
Abstract
The aim of this investigation was to delve into the impact of abrasive water jet machining (AWJM) process variables on the surface roughness (Ra) and kerf angle (Ka) of hybrid fiber‐reinforced polyester composites. Utilizing both response surface methodology (RSM) and artificial neural network (ANN) prediction models, the study sought to optimize the input parameters for abrasive water jet machining, specifically in the context of paddy straw and PALF‐reinforced polyester hybrid composites. The process parameters targeted for optimization included the abrasive flow rate, traverse rate, and standoff distance during AWJM. The investigation identified an optimal combination of AWJM parameters that effectively meets the practical requirements for machining hybrid fiber‐reinforced polyester composites. According to the RSM, the suggested optimal values for the process parameters are an abrasive flow rate set at 300 g/min, traverse speed at 110 mm/min, and standoff distance at 1 mm. The ANN exhibited robust predictive capabilities, achieving high R2 scores of 0.932 and 0.962 for surface roughness and kerf angle, respectively. To enhance the performance of abrasive water jet machining and minimize surface roughness and kerf angle, the researchers conducted an optimization of the process parameters. Subsequently, confirmation experiments were executed to validate the predictive model and fine‐tune the set of process parameters for practical application.Highlights: Investigated AWJM impact on Ra value and kerf angle of hybrid composites. Used RSM and ANN models for parameter optimization in biocomposite. Optimal AWJM parameters: AFR (300 g/min), TS (110 mm/min), and SOD (1 mm). ANN showed strong predictions: R2 scores 0.932 (Ra) and 0.962 (Ka). Confirmation experiments validated the predictive model for applications.Keywords
Funding Information
- Department of Science and Technology, Ministry of Science and Technology, India (DST/TDT/WM/2019/78 Consortia (G))
This publication has 43 references indexed in Scilit:
- Exploration on Kerf-angle and Surface Roughness in Abrasive Waterjet Machining using Response Surface MethodJournal of The Institution of Engineers (India): Series C, 2017
- Experimental study of delamination and kerf geometry of carbon epoxy composite machined by abrasive water jetJournal of Composite Materials, 2017
- Performance Evaluation of Abrasive Water Jet Machining on Banana Fiber Reinforced Polyester CompositeJournal of Natural Fibers, 2016
- Investigation on performance of abrasive water jet in machining hybrid compositesMaterials and Manufacturing Processes, 2016
- Prediction and optimization of process parameters of green composites in AWJM process using response surface methodologyThe International Journal of Advanced Manufacturing Technology, 2016
- Mechanical and machining performance of glass and coconut sheath fibre polyester composites using AWJMJournal of Reinforced Plastics and Composites, 2015
- Multiresponse Optimization of Abrasive Water Jet Cutting Process Parameters Using TOPSIS ApproachMaterials and Manufacturing Processes, 2014
- Modeling and optimization of operating parameters for abrasive waterjet turning alumina ceramics using response surface methodology combined with Box–Behnken designCeramics International, 2014
- Green composites: An overviewPolymer Composites, 2011
- Investigation on glass/epoxy composite surfaces machined by abrasive water jet machiningJournal of Materials Processing Technology, 2008