Mechanical and Microstructural Performance of Different Plaster Mortars Used to Protect Interior Concrete Exposed to Elevated Temperatures
Open Access
Abstract
The physical, mechanical, and microstructural degradation that occurs in concrete elements exposed to high temperatures constitutes an important research topic in terms of the fire safety and service performance of structures. In this study, the behavior of plaster mortars produced with cement-based and ground granulated blast furnace slag (GGBFS)-based binders, as well as normal concrete (interior concrete) specimens coated with these mortars, under high-temperature exposure was experimentally investigated. After the prepared mortars and plastered concrete specimens were exposed to temperatures of 100, 300, 500, and 700 °C, changes in compressive strength, ultrasonic pulse velocity (UPV), water absorption, mass loss, and bulk density were evaluated. Analysis of the experimental results showed that high temperatures, particularly 300 °C and above, caused significant performance losses in all binder systems. Although calcium aluminate cement-based mortars developed high early-age strength, they exhibited more pronounced strength losses under elevated temperatures, whereas geopolymer-based binders demonstrated more stable performance at low and medium temperatures. Additionally, a strong correlation (R2 ≈ 0.89) was observed between UPV and compressive strength in the plastered interior concrete specimens. At 500 and 700 °C, the plastered concrete specimens exhibited 9.8–13.3% and 10.4–18.1% higher residual compressive strength, respectively, compared with the unplastered control specimens. At 700 °C, the PC-based plaster provided the highest improvement in residual compressive strength (18.1%), while the G-Na system exhibited the lowest water absorption, which was 19.5% lower than that of the control concrete. Plastered concrete specimens retained their mechanical and physical properties better than the control (unplastered) concrete specimens at all temperature levels, and this finding was further supported by microstructural analyses. The results indicate that plaster systems produced with different binders are effective in limiting thermal damage to the interior concrete.Keywords
Funding Information
- Inönü Üniversitesi (FYL-2020-2073)
- Alfaisal University
This publication has 111 references indexed in Scilit:
- Performance-Based Comparison of UHPC and UHPGC Incorporating FA, GBFS, and MK Under Ambient and Elevated TemperaturesIranian Journal of Science and Technology, Transactions of Civil Engineering, 2026
- Geopolymer Concrete: A Comprehensive Review of Current Research Trends, Challenges, and Environmental-Economic ImplicationsArchives of Computational Methods in Engineering, 2026
- Mechanical and micro‐characterization of alkali‐activated concrete under high‐temperature exposureStructural Concrete, 2024
- An in-depth examination of fire-related damages in reinforced concrete structures-A reviewJournal of Building Pathology and Rehabilitation, 2024
- Fire resistance characteristics of geopolymer concrete for environmental sustainability: a review of thermal, mechanical and microstructure propertiesEnvironment, Development and Sustainability, 2022
- The influence of palm oil fuel ash heat treatment on the strength activity, porosity, and water absorption of cement mortarEnvironmental Science and Pollution Research, 2022
- Effect of Steel Fiber Additive on High Temperature Resistance in Geopolymer MortarsIranian Journal of Science and Technology, Transactions of Civil Engineering, 2022
- The impact of metakaolin, silica fume and fly ash on the temperature resistance of high strength cement pasteJournal of Thermal Analysis and Calorimetry, 2021
- Correlation Between Ultrasonic Pulse Velocity (UPV) and Compressive Strength of Coal Bottom Ash MortarJournal of The Institution of Engineers (India): Series A, 2021
- Evaluation of the mechanical properties of high-strength cement paste at elevated temperatures using metakaolinJournal of Thermal Analysis and Calorimetry, 2020