Fast start-up of anammox process with mixed activated sludge and settling option
- 19 September 2017
- journal article
- research article
- Published by Taylor & Francis in Environmental Technology
- Vol. 39 (23) , 3088-3095
Abstract
In this study, successful start-up of the anaerobic ammonium oxidation (anammox) process in a sequencing batch reactor (SBR) was achieved by seeding mixed activated sludge which included aerobic sludge, anaerobic sludge, simultaneous partial nitrification, anammox and denitrification (SNAD) sludge, and anammox sludge with low activity at a 2200:2100:5:2 volume ratio. On day 15, the effective anammox activity was attained in SBR, with the specific total nitrogen removal rate (SRR) of 0.214 gNg−1 VSSd−1. The total nitrogen removal rate (NRR) increased to 230 gNm−3 d−1 by gradually reducing the setting time to 10 min. With the nitrogen loading rate (NLR) up to 506 gNm−3 d−1, the total NRR of the SBR reached 433 gNm−3 d−1 during stationary phase. Candidatus Brocadia was detected as predominant functional microbes in the anammox SBR. The results demonstrated the feasibility of seeding mixed activated sludge to start-up an anammox SBR by settling option.Keywords
Funding Information
- Trans-Century Training Programme Foundation (Grant No. 2012ZX07202-005,NCET-10-0008)
This publication has 47 references indexed in Scilit:
- COMBINED TREATMENT OF PYROGENIC WASTEWATER FROM OIL SHALE RETORTING; pp. 82–96Oil Shale, 2017
- A pilot study of three-stage biological–chemical treatment of landfill leachate applying continuous ferric sludge reuse in Fenton-like processClean Technologies and Environmental Policy, 2016
- Fast start-up of the anammox process with addition of reduced graphene oxidesChemical Engineering Journal, 2016
- Rapid and successful start-up of anammox process by immobilizing the minimal quantity of biomass in PVA-SA gel beadsWater Research, 2015
- Ammonium estimation in an ANAMMOX SBR treating anaerobically digested domestic wastewaterChemical Engineering Science, 2015
- Start-up and long-term operation of the Anammox process in a fixed bed reactor (FBR) filled with novel non-woven ring carriersChemosphere, 2013
- Chemical functionalization of a polyvinylidene fluoride surfacePolymer Journal, 2012
- Impact of reactor configuration on anammox process start-up: MBR versus SBRBioresource Technology, 2012
- Performance comparison of two anammox reactors: SBR and UBFChemical Engineering Journal, 2008
- Startup of reactors for anoxic ammonium oxidation: Experiences from the first full-scale anammox reactor in RotterdamWater Research, 2007