Enhanced Luminescence of Yb3+ Ions Implanted to ZnO through the Selection of Optimal Implantation and Annealing Conditions
Authors:
- Renata RatajczakRRRenata Ratajczak
- Elzbieta GuziewiczEGElzbieta Guziewicz
- Slawomir PrucnalSlawomir Prucnal
- Cyprian MieszczynskiCMCyprian Mieszczynski
- Przemysław JozwikPrzemysław Jozwik
- Marek BarlakMarek Barlak
- Svitlana RomaniukSRSvitlana Romaniuk
- Sylwia GieraltowskaSGSylwia Gieraltowska
- Wojciech WozniakWWWojciech Wozniak
- René HellerRHRené Heller
- Ulrich KentschUKUlrich Kentsch
- Stefan FacskoSFStefan Facsko
Open Access
Abstract
Rare earth-doped zinc oxide (ZnO:RE) systems are attractive for future optoelectronic devices such as phosphors, displays, and LEDs with emission in the visible spectral range, working even in a radiation-intense environment. The technology of these systems is currently under development, opening up new fields of application due to the low-cost production. Ion implantation is a very promising technique to incorporate rare-earth dopants into ZnO. However, the ballistic nature of this process makes the use of annealing essential. The selection of implantation parameters, as well as post-implantation annealing, turns out to be non-trivial because they determine the luminous efficiency of the ZnO:RE system. This paper presents a comprehensive study of the optimal implantation and annealing conditions, ensuring the most efficient luminescence of RE3+ ions in the ZnO matrix. Deep and shallow implantations, implantations performed at high and room temperature with various fluencies, as well as a range of post-RT implantation annealing processes are tested: rapid thermal annealing (minute duration) under different temperatures, times, and atmospheres (O2, N2, and Ar), flash lamp annealing (millisecond duration) and pulse plasma annealing (microsecond duration). It is shown that the highest luminescence efficiency of RE3+ is obtained for the shallow implantation at RT with the optimal fluence of 1.0 × 1015 RE ions/cm2 followed by a 10 min annealing in oxygen at 800 °C, and the light emission from such a ZnO:RE system is so bright that can be observed with the naked eye.Keywords
Funding Information
- Polish Ministry of Education and Science (5134/HZDR/2020/0, 20001987-ST, 21002630-ST, 21002632-ST)
- Helmholtz-Zentrum Dresden-Rossendorf (5134/HZDR/2020/0, 20001987-ST, 21002630-ST, 21002632-ST)
This publication has 62 references indexed in Scilit:
- Rapid thermal annealing of rare earth implanted ZnO epitaxial layersOptical Materials, 2011
- Photoluminescence from AlxIn1−xN layers doped with Tb3+ionsJournal of Physics: Conference Series, 2011
- Effect of pre-existing disorder on surface amorphization in GaNJournal of Applied Physics, 2010
- Effect of the density of collision cascades on ion implantation damage in ZnOJournal of Applied Physics, 2007
- Luminescent layers for enhanced silicon solar cell performance: Down-conversionSolar Energy Materials and Solar Cells, 2006
- A comprehensive review of ZnO materials and devicesJournal of Applied Physics, 2005
- Optical doping of ZnO with Tm by ion implantationPhysica B: Condensed Matter, 2003
- Ion-beam-produced structural defects in ZnOPhysical Review B, 2003
- Recent developments in rare-earth doped materials for optoelectronicsProgress in Quantum Electronics, 2002
- Luminescence of erbium implanted in various semiconductors: IV, III-V and II-VI materialsElectronics Letters, 1989