Physico‐chemical, thermal, and mechanical properties of PLA‐nHA nanocomposites: Effect of glass fiber reinforcement
Authors:
- 3 April 2020
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 137 (42)
Abstract
In this study, tri‐layered composites were prepared by reinforcing poly‐lactic acid (PLA) nano‐hydroxyapatite (n‐HA) (1 and 5 wt%) and 20 mol% continuous phosphate glass fibers (PGF). Initially, the effect of addition of 1 and 5% n‐HA on the structural, thermal, mechanical, and thermo‐mechanical properties of 100% PLA was investigated. With 5 wt% n‐HA addition the tensile modulus (TM), flexural modulus (FM), tensile strength (TS), and flexural strength (FS) of 100% PLA was improve by 14.9, 47.4, 6, and 32.9%, respectively. Whereas, the un‐notched impact strength of the nanocomposites suffer 2% deterioration. However, T g decreased by 0.3°C and T c increased by 10°C as 5 wt% n‐HA was added to 100% PLA. Afterwards, the 5% n‐HA/PLA composite were reinforced with 20 mol% continuous PGF and the TM, FM, TS, and FS of the tri‐layered composites were 162.6, 412.5, 28.4, and 157.4% higher as compared to 100%PLA. Furthermore, the storage modulus of the 1% n‐HA‐filled composites was 500 MPa lower than 100%PLA, while 5 wt% n‐HA‐filled composites showed similar storage modulus as 100% PLA. 5 wt% n‐HA‐filled composite showed the highest peak of loss modulus which may be attribute to the chain segment of PLA matrix after the incorporation of HA. Thus, n‐HA and PGF reinforcement resulted in improved mechanical properties of the composites and have great potential as biodegradable bone fixation device with enhanced load‐bearing ability.Keywords
Funding Information
- Ningbo Municipal Bureau of Science and Technology (2011B81006)
This publication has 29 references indexed in Scilit:
- Preparation and characterization of nano-hydroxyapatite within chitosan matrixMaterials Science and Engineering: C, 2013
- Polylactide (PLA)-based nanocompositesProgress in Polymer Science, 2013
- Effect of Boron Addition on the Thermal, Degradation, and Cytocompatibility Properties of Phosphate-Based GlassesBioMed Research International, 2013
- Fabrication of Dense Hydroxyapatite Nanobioceramics with Enhanced Mechanical Properties via Two‐Step Sintering ProcessInternational Journal of Applied Ceramic Technology, 2011
- Biodegradable polymer matrix nanocomposites for tissue engineering: A reviewPolymer Degradation and Stability, 2010
- Effect of the content of hydroxyapatite nanoparticles on the properties and bioactivity of poly(l-lactide) – Hybrid membranesComposites Science and Technology, 2010
- Microwave-processed nanocrystalline hydroxyapatite: Simultaneous enhancement of mechanical and biological propertiesActa Biomaterialia, 2010
- Nanocrystalline hydroxyapatite with simultaneous enhancements in hardness and toughnessBiomaterials, 2009
- Effect of surface modified hydroxyapatite on the tensile property improvement of HA/PLA compositeApplied Surface Science, 2008
- Thermal and dynamic mechanical analysis of polystyrene composites reinforced with short sisal fibresComposites Science and Technology, 2001