Online Detection of High-Resistance Connections in the Incoming Electrical Circuit for Induction Motors
Authors:
- 16 March 2009
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 45 (2) , 694-702
Abstract
A high-resistance (R) connection in an induction-motor electrical circuit results in localized overheating and supply-voltage unbalance, which leads to a decreased efficiency and reliability and an increased fire hazard in the electrical distribution system and motor. Therefore, it is important to monitor and correct high-R connections for a reliable, efficient, and safe operation of the industrial facility. This paper focuses on the development of an online technique for detecting poor connections based on monitoring the asymmetry in the voltage and current measurement. The development of the technique begins with the derivation of the dynamic model of an induction motor with high-R connections. Based on the analysis of the model, two approaches for detecting poor contacts using the negative-sequence current and zero-sequence voltage are proposed. In addition to detecting the existence of faults, the location and severity of the fault can also be determined using the proposed method. An experimental study on a 10-hp induction machine under simulated and realistic high-R conditions shows that the proposed techniques provide a simple low-cost solution for reliably detecting poor contact problems at an early stage. It is also shown that the severity and location of the high-R contact fault can be assessed with high accuracy.Keywords
This publication has 10 references indexed in Scilit:
- Conditions for series arcing phenomena in PVC wiring2005
- Detection of high-resistance motor connections using symmetrical component analysis and neural network models2003
- A new approach to on-line turn fault detection in AC motors2002
- Modern online testing of induction motors for predictive maintenance and monitoringIEEE Transactions on Industry Applications, 2002
- Transient model for induction machines with stator winding turn faultsIEEE Transactions on Industry Applications, 2002
- Electrical Contacts1999
- Vector Control and Dynamics of AC Drives1996
- Glowing contact areas in loose copper wire connectionsIEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1992
- Cause and analysis of stator and rotor failures in three-phase squirrel-cage induction motorsIEEE Transactions on Industry Applications, 1992
- Time-wise increases in contact resistance due to surface roughness and corrosionIEEE Transactions on Components, Hybrids, and Manufacturing Technology, 1991