Identification of structural surfaces' positions on an F/A-18 using the subspace identification method from flight flutter tests
Authors:
- 1 May 2007
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
- Vol. 221 (5) , 719-731
Abstract
In the current paper, a linear state-space mathematical model, identified from flight flutter tests is presented, to simulate the aeroelastic deflections of specific structural parts of the NASA F/A-18 Active Aeroelastic Wing research aircraft. The flight flutter tests were performed in steady-level flight with Schroeder frequency excitation induced on the aircraft ailerons by an on-board excitation system activated by the pilot. The results of the flight flutter tests were used to generate an aeroelastic model in which the deflections of the specific aircraft surfaces are functions of the control inputs combined with the deflections of other aircraft surfaces. The F/A-18 linear model is conceived as nine third-order multiple input-single output (MISO) models. Each model has nine inputs and one output. The nine inputs are the differential ailerons deflection and the deflections of all the other parts of the aircraft. The output of each model is the structural deflection of a given aircraft structure. The model's parameters are estimated with the subspace system identification algorithm, an efficient non-iterative algorithm that computes the system matrices directly from the input and output data. The model's quality is evaluated by calculating the fit and correlation coefficients between the model's outputs and the outputs from flight flutter test data. Although the fit coefficient results are very good - between 89 and 99 per cent - the correlation coefficient method gave the best results (nearly 100 per cent). Finally, resampled inputs were used to validate the F/A-18 model's robustness. The model's aircraft structure was validated for flutter flight tests at different Mach numbers and altitudes. The estimated linear model fits the flight flutter test data very well. The subspace method is therefore very convernvenient for model identification from flight flutter tests.Keywords
This publication has 14 references indexed in Scilit:
- Nonlinear Aeroelastic System Identification with Application to Experimental DataJournal of Guidance, Control, and Dynamics, 2006
- Subspace system identification framework for the analysis of multimoded propagation of THz-transient signalsMeasurement Science and Technology, 2005
- Robust Aeroservoelastic Stability Analysis1999
- Analysis of state space system identification methods based on instrumental variables and subspace fittingAutomatica, 1997
- Subspace-based methods for the identification of linear time-invariant systemsAutomatica, 1995
- N4SID: Subspace algorithms for the identification of combined deterministic-stochastic systemsAutomatica, 1994
- Identification of the deterministic part of MIMO state space models given in innovations form from input-output dataAutomatica, 1994
- The singular value decomposition: Its computation and some applicationsIEEE Transactions on Automatic Control, 1980
- Synthesis of low-peak-factor signals and binary sequences with low autocorrelation (Corresp.)IEEE Transactions on Information Theory, 1970
- Fitting autoregressive models for predictionAnnals of the Institute of Statistical Mathematics, 1969