Turbulent Three-Dimensional Air Flow and Heat Transfer in a Cross-Corrugated Triangular Duct
Author:
- 26 April 2005
- journal article
- Published by Wiley in Journal of Heat Transfer
- Vol. 127 (10) , 1151-1158
Abstract
Turbulent complex three-dimensional air flow and heat transfer inside a cross-corrugated triangular duct is numerically investigated. Four turbulence models, the standard k‐ε (SKE), the renormalized group k‐ε, the low Reynolds k‐ω (LKW), and the Reynolds stress models (RSM) are selected, with nonequilibrium wall functions approach (if applicable). The periodic mean values of the friction factor and the wall Nusselt numbers in the hydro and thermally developing entrance region are studied, with the determination of the distribution of time-averaged temperature and velocity profiles in the complex topology. The results are compared with the available experimental Nusselt numbers for cross-corrugated membrane modules. Among the various turbulence models, generally speaking, the RSM model gives the best prediction for 2000⩽Re⩽20,000. However, for 2000⩽Re⩽6000, the LKW model agrees the best with experimental data, while for 6000<Re⩽20,000, the SKE predicts the best. Two correlations are proposed to predict the fully developed periodic mean values of Nusselt numbers and friction factors for Reynolds numbers ranging from 2000 to 20,000. The results are that compared to parallel flat plates, the corrugated ducts could enhance heat transfer by 40 to 60%, but with a 2 times more pressure drop penalty. The velocity, temperature, and turbulence fields in the flow passages are investigated to give some insight into the mechanisms for heat transfer enhancement.Keywords
This publication has 20 references indexed in Scilit:
- Calculation of turbulent fluid flow and heat transfer in ducts by a full Reynolds stress modelInternational Journal for Numerical Methods in Fluids, 2003
- Membrane-based Enthalpy Exchanger: material considerations and clarification of moisture resistanceJournal of Membrane Science, 2001
- Hydrodynamics and thermal characteristics of corrugated channels: computational approachApplied Mathematical Modelling, 2000
- Heat and mass transfer in a membrane-based energy recovery ventilatorJournal of Membrane Science, 1999
- Numerical prediction for laminar forced convection heat transfer in parallel-plate channels with streamwise-periodic rod disturbancesInternational Journal for Numerical Methods in Fluids, 1998
- Turbulent mixed convective heat transfer in the entrance region of a curved pipe with uniform wall-temperatureInternational Journal of Heat and Mass Transfer, 1998
- Investigation of flow and heat transfer in corrugated passages—II. Numerical simulationsInternational Journal of Heat and Mass Transfer, 1996
- Correlations for heat transfer and flow friction characteristics of compact plate-type heat exchangersInternational Journal of Heat and Mass Transfer, 1992
- Turbulence models for near-wall and low Reynolds number flows - A reviewAIAA Journal, 1985
- The effect of the corrugation inclination angle on the thermohydraulic performance of plate heat exchangersInternational Journal of Heat and Mass Transfer, 1985