Modelling of XCO2 Surfaces Based on Flight Tests of TanSat Instruments
Open Access
Abstract
The TanSat carbon satellite is to be launched at the end of 2016. In order to verify the performance of its instruments, a flight test of TanSat instruments was conducted in Jilin Province in September, 2015. The flight test area covered a total area of about 11,000 km2 and the underlying surface cover included several lakes, forest land, grassland, wetland, farmland, a thermal power plant and numerous cities and villages. We modeled the column-average dry-air mole fraction of atmospheric carbon dioxide (XCO2) surface based on flight test data which measured the near- and short-wave infrared (NIR) reflected solar radiation in the absorption bands at around 760 and 1610 nm. However, it is difficult to directly analyze the spatial distribution of XCO2 in the flight area using the limited flight test data and the approximate surface of XCO2, which was obtained by regression modeling, which is not very accurate either. We therefore used the high accuracy surface modeling (HASM) platform to fill the gaps where there is no information on XCO2 in the flight test area, which takes the approximate surface of XCO2 as its driving field and the XCO2 observations retrieved from the flight test as its optimum control constraints. High accuracy surfaces of XCO2 were constructed with HASM based on the flight’s observations. The results showed that the mean XCO2 in the flight test area is about 400 ppm and that XCO2 over urban areas is much higher than in other places. Compared with OCO-2’s XCO2, the mean difference is 0.7 ppm and the standard deviation is 0.95 ppm. Therefore, the modelling of the XCO2 surface based on the flight test of the TanSat instruments fell within an expected and acceptable range.Keywords
Funding Information
- National Natural Science Foundation of China (91325204)
- National High-tech R&D Program of the Ministry of Science and Technology of the People’s Republic of China (2013AA122003)
- National Key Technologies R&D Program of the Ministry of Science and Technology of the People’s Republic of China (2013BACO3B05)
This publication has 35 references indexed in Scilit:
- Climate change trend in China, with improved accuracyClimatic Change, 2013
- The ACOS CO2 retrieval algorithm – Part II: Global XCO2 data characterizationAtmospheric Measurement Techniques, 2012
- Atmospheric greenhouse gases retrieved from SCIAMACHY: comparison to ground-based FTS measurements and model resultsAtmospheric Chemistry and Physics, 2012
- Surface modelling of soil properties based on land use informationGeoderma, 2011
- Retrieval algorithm for CO2 and CH4 column abundances from short-wavelength infrared spectral observations by the Greenhouse gases observing satelliteAtmospheric Measurement Techniques, 2011
- Global Characterization of CO2 Column Retrievals from Shortwave-Infrared Satellite Observations of the Orbiting Carbon Observatory-2 MissionRemote Sensing, 2011
- An Adaptive Method of High Accuracy Surface Modeling and Its Application to Simulating Elevation SurfacesTransactions in GIS, 2010
- Adjustment computation of HASM: a high-accuracy and high-speed methodInternational Journal of Geographical Information Science, 2010
- High-accuracy surface modelling and its application to DEM generationInternational Journal of Remote Sensing, 2010
- Surface modelling of soil pHGeoderma, 2009