Effect of microencapsulated curing agents on the curing behavior for diglycidyl ether of bisphenol A epoxy resin systems
- 23 October 2007
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 107 (3) , 1661-1669
Abstract
Microcapsules containing a curing agent, 2‐phenyl imidazole (2PZ), for a diglycidyl ether of bisphenol A (DGEBA) epoxy resin were prepared by a solid‐in‐oil‐in‐water emulsion solvent evaporation technique with poly(methyl methacrylate) (PMMA) as a polymeric wall. The mean particle size of the microcapsules and the concentration of 2PZ were about 10 μm and nearly 10 wt %, respectively. The onset cure temperature and peak temperature of the DGEBA/2PZ–PMMA microcapsule system appeared to increase by nearly 30 and 10°C, respectively, versus those of the DGEBA/2PZ system because of the increased reaction energy of curing. The former could take more than 3 months at room temperature, whereas the latter was cured after only a week. The values of the reaction order (a curing kinetic parameter) for DGEBA/2PZ and DGEBA/2PZ–PMMA microcapsules were quite close, and this showed that the curing reactions of the two samples proceeded conformably. The curing mechanism was investigated, and a two‐step initiation mechanism was considered: the first was assigned to adduct formation, whereas the second was due to alkoxide‐initiated polymerization. The glass‐transition temperature of DGEBA/2PZ was 165.2°C, nearly 20°C higher than the glass‐transition temperatures of DGEBA/2PZ–PMMA microcapsules and DGEBA/2PZ/PMMA microspheres, as determined by differential scanning calorimetry measurements. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008Keywords
This publication has 15 references indexed in Scilit:
- The kinetics and mechanism of cure of an amino-glycidyl epoxy resin by a co-anhydride as studied by FT-Raman spectroscopyPolymer, 2004
- Synthesis and characterization of novel epoxy resin bearing naphthyl and limonene moieties, and its cured polymerPolymer, 2004
- Synthesis and curing of new aromatic azomethine epoxies with alkoxy side groupsEuropean Polymer Journal, 2003
- Novel microencapsulated curing accelerator for prolonging shelf life of epoxy resin compositionJournal of Applied Polymer Science, 2002
- The effect of temperature on the kinetics of diacrylate photopolymerizations studied by Real-time FTIR spectroscopyPolymer, 2000
- DSC studies of the curing mechanisms and kinetics of DGEBA using imidazole curing agentsPolymer, 2000
- Kinetic studies of an epoxy cure reaction by isothermal DSC analysisThermochimica Acta, 2000
- Kinetics study of imidazole-cured epoxy-phenol resinsJournal of Polymer Science Part A: Polymer Chemistry, 1999
- Modulated differential scanning calorimetry: Non-isothermal cure, vitrification, and devitrification of thermosetting systemsThermochimica Acta, 1996
- Controlled-release of leuprolide acetate from polylactic acid or copoly(lactic/glycolic) acid microcapsules: Influence of molecular weight and copolymer ratio of polymer.Chemical and Pharmaceutical Bulletin, 1988