A Facile Preparation Method for Corrosion-Resistant Copper Superhydrophobic Surfaces with Ordered Microstructures by Etching
Open Access
Abstract
Superhydrophobic surfaces wit ordered hierarchical microstructures were prepared on copper substrates by combining thermal transfer and etching. The surface morphology, wettability, chemical composition and corrosion resistance were, respectively, characterized via scanning electron microscopy, a three-dimensional confocal microscope, contact angle measurement, X-ray diffraction, X-ray photoelectron spectroscopy, electrokinetic polarization and electrochemical impedance spectroscopy techniques. The contact angle of the obtained superhydrophobic surface is up to 153.3° with a reduction in the corrosion current density from 3.9105 × 10−5 A/cm2 to 3.5421 × 10−6 A/cm2 via the electrokinetic polarization curve test, and the maximum capacitive arc radius of the superhydrophobic surface is about 2.5 × 104 Ω cm2 via the electrochemical impedance spectroscopy test, which is two orders of magnitude higher than that of bare copper substrate, and the maximum modulus value |Z| is also two orders of magnitude higher than that of bare copper substrate, indicating that the superhydrophobic surface has better corrosion resistance. This method provides an effective etching approach toward preparing superhydrophobic surfaces with ordered microstructures.Keywords
Funding Information
- Natural Science Foundation of Guangxi (2023GXNSFAA026371)
This publication has 39 references indexed in Scilit:
- Formation, characterization and corrosion protection efficiency of self-assembled 1-octadecyl-1H-imidazole films on copper for corrosion protectionArabian Journal of Chemistry, 2017
- One-step method for the fabrication of superhydrophobic surface on magnesium alloy and its corrosion protection, antifouling performanceCorrosion Science, 2014
- Superhydrophobic aluminum alloy surface: Fabrication, structure, and corrosion resistanceColloids and Surfaces A: Physicochemical and Engineering Aspects, 2014
- A novel fabrication of a superhydrophobic surface with highly similar hierarchical structure of the lotus leaf on a copper sheetApplied Surface Science, 2013
- Facile Fabrication of a Superhydrophobic Cu Surface via a Selective Etching of High-Energy FacetsThe Journal of Physical Chemistry C, 2012
- One-step electrodeposition process to fabricate cathodic superhydrophobic surfaceApplied Surface Science, 2011
- Superhydrophobic fluoropolymer-modified copper surface via surface graft polymerisation for corrosion protectionCorrosion Science, 2011
- Electrochemical deposition of a copper carboxylate layer on copper as potential corrosion inhibitorJournal of Solid State Electrochemistry, 2011
- Design and Creation of Superwetting/Antiwetting SurfacesAdvanced Materials, 2006
- Purity of the sacred lotus, or escape from contamination in biological surfacesPlanta, 1997