Transverse Crack Detection in 3D Angle Interlock Glass Fibre Composites Using Acoustic Emission
Open Access
Abstract
In addition to manufacturing cost and production rates, damage resistance has become a major issue for the composites industry. Three-dimensional (3D) woven composites have superior through-thickness properties compared to two-dimensional (2D) laminates, for example, improved impact damage resistance, high interlaminar fracture toughness and reduced notch sensitivity. The performance of 3D woven preforms is dependent on the fabric architecture, which is determined by the binding pattern. For this study, angle interlock (AI) structures with through-thickness binding were manufactured. The AI cracking simulation shows that the transverse component is the one that leads to transverse matrix cracking in the weft yarn under tensile loading. Monitoring of acoustic emission (AE) during mechanical loading is an effective tool in the study of damage processes in glass fiber-reinforced composites. Tests were performed with piezoelectric sensors bonded on a tensile specimen acting as passive receivers of AE signals. An experimental data has been generated which was useful to validate the multi-physics finite element method (MP-FEM), providing insight into the damage behaviour of novel 3D AI glass fibre composites. MP-FEM and experimental data showed that transverse crack generated a predominant flexural mode A0 and also a less energetic extensional mode S0.Keywords
This publication has 39 references indexed in Scilit:
- Mechanical behaviour and health monitoring by acoustic emission of sandwich composite integrated by piezoelectric implantComposites Part B: Engineering, 2014
- Prediction of attenuated guided waves propagation in carbon fiber composites using Rayleigh damping modelJournal of Intelligent Material Systems and Structures, 2014
- Integration of the Kohonen's self-organising map and k-means algorithm for the segmentation of the AE data collected during tensile tests on cross-ply compositesNDT & E International, 2005
- Use of acoustic emission to characterize corrosion fatigue damage accumulation in glass fiber reinforced polyester laminatesPolymer Composites, 1999
- Characteristics of damage and fracture process of carbon fiber reinforced plastic under loading-unloading test by using AE methodMaterials Science and Engineering: A, 1997
- Damage mechanisms characterisation of carbon fibre/epoxy composite laminates by both electrical resistance measurements and acoustic emission analysisScripta Materialia, 1996
- On the use of acoustic emission to investigate damage mechanisms in glass-fibre-reinforced polypropyleneComposites Science and Technology, 1994
- ACOUSTIC EMISSION CHARACTERIZATION OF A GLASS-MATRIX COMPOSITENondestructive Testing and Evaluation, 1992
- Investigations of the fracture mechanism of carbon/epoxy composites by AE signal analyses.TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A, 1990
- Analysis of Composite Failure Mechanisms Using Acoustic EmissionsJournal of Composite Materials, 1971