Recovery of Fe and Al from red mud by a novel fractional precipitation process
- 12 February 2020
- journal article
- research article
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 27 (13) , 14642-14653
Abstract
The development of cheap and effective approach for utilizing red mud (RM) waste is a long and arduous task. This work provided a technically and economically feasible route to utilize RM waste for the production of high valuable chemicals by use of the industrial wastes as cheap raw materials. The Fe and Al elements were first leached from RM through hydrothermal reaction and then were separated by precipitation after the Fe(III) in leachate was reduced to Fe(II) by iron powder. Above 90% Fe and Al were extracted from RM with the Fe and Al purity of about 95% and 45%, respectively. The control test revealed that the main impurity of Al product was caused by the adsorbed SO42− during the precipitation of the Al3+. The structural characterization demonstrated that the obtained Fe products were in nanoscale, and the Ti-Si residue has high BET area of 203.7 m2/g. Four products of nano-Fe3O4/nano-Fe, aluminum oxide, Ti-Si residue, and (NH4)2SO4 were obtained as valuable chemical materials for industry. This demonstrated utilization of industrial waste to produce high added-value products with high efficiency and low cost will possess promising application prospect for the resource utilization of RM in industry.Keywords
Funding Information
- International Science and Technology cooperation program of China (2016YFE0128300)
- State Key Laboratory of Multi-phase Complex Systems, Chinese Academy of Sciences (Grant MPCS-2019-0-03)
- Natural Science Foundation of China (Grant 21601192 and 21878310)
This publication has 27 references indexed in Scilit:
- Red-mud treatment using oxalic acid by UV irradiation assistanceTransactions of Nonferrous Metals Society of China, 2012
- Bauxite residue issues: II. options for residue utilizationHydrometallurgy, 2011
- A review of the use of red mud as adsorbent for the removal of toxic pollutants from water and wastewaterEnvironmental Technology, 2011
- Recovery of alumina and ferric oxide from Bayer red mud rich in iron by reduction sinteringTransactions of Nonferrous Metals Society of China, 2009
- Application of Bayer red mud for iron recovery and building material production from alumosilicate residuesJournal of Hazardous Materials, 2009
- Titanium leaching from red mud by diluted sulfuric acid at atmospheric pressureJournal of Hazardous Materials, 2008
- Radiological aspects of the usability of red mud as building material additiveJournal of Hazardous Materials, 2008
- TRENDS IN RED MUD UTILIZATION – A REVIEWMineral Processing and Extractive Metallurgy Review, 2004
- Protonation and Charging of Nanosized Gibbsite (α-Al(OH)3) Particles in Aqueous SuspensionLangmuir, 2002
- Statistical modeling of sulfuric acid leaching of TiO2 from red mudHydrometallurgy, 2000